[foxboro] DCI PAKOUT

Hi List
I am trying to write the PAKCO parameter of a PAKOUT DCI block from both
graphics and IND sequence external write
The problem is the parameter is a packed long with a mask, the mask is
needed to set individual bits without overwriting others

omset -pl 0x80000000:0x80000000 will successfully set bit one but how do
you configure this inside a graphic or in sequence code
Shaun 




NOTICE - This message and any attached files may contain information that is 
confidential, legally privileged or proprietary.  It is intended only for use 
by the intended recipient. If you are not the intended recipient or the person 
responsible for delivering the message to the intended recipient, be advised 
that you have received this message in error. Any dissemination, copying, use 
or re-transmission of this message or attachment, or the disclosure of any 
information therein, is strictly forbidden. BlueScope Steel Limited does not 
represent or guarantee that this message or attachment is free of errors, virus 
or interference. 
   
If you have received this message in error please notify the sender immediately 
and delete the message.  Any views expressed in this email are not necessarily 
the views of BlueScope Steel Limited.
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: