[foxboro] Cyan Colors (Communication drop) at APC Displays

Hi All,
We have one AW51E and three WP51Ds with one CP60FT and 200 Series FBMs. We 
have applied APC on our Crude Distillation Unit using Connoisseur ver. 14.03 
on a separate PC connected to the AW via second ethernet port. We are facing 
some intermittent cyan coloring problem at APC displays i.e the dyanmic 
values field at APC graphics turns into cyan color intermittently. This 
happens to APC graphics on the WP51Ds only while the APC graphics at AW 
remains uneffected i.e no cyan color. We observed the perfmeter at the WPs 
and AWs to view the load on the CPU. We observed that at the cyan coloring 
instance the perfmeter at WPs shows high CPU load peaks while the CPU load 
is normal at AW i.e same as before cyan coloring. At the time of cyan 
coloring we also checked the availability APC data on WP using omget 
command, it returned a valid value of the that specific variable but it was 
not being appeared at APC graphics and was on the cyan color. The cyan color 
remains on the screen for few minutes and then the screen becomes normal i.e 
it starts showing correct values of APC variables.
If anyone have encountered this problem before and rectified it, Kindly 
advise the possible cause of this problem and its remedy.

Rgds,
Ali Ahmed Zahidi
Pakistan Refinrery Ltd.
Karachi, Pakistan.

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today it's FREE! 
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: