[foxboro] ControlLogix - again.

From: "Glen Bounds" <gbounds@xxxxxxxxxxxxx>
To: <foxboro@xxxxxxxxxxxxx>
Date: Mon, 25 Mar 2002 10:16:34 -0500

Has anyone successfully hooked up a ControlLogix 
to an Integrator 30?  I've almost given up on the OPC
server, because I can't get the redunant system to work.

I need ECB recommendations and wiring differences.

Thanks,
Glen Bounds
Sr. Control Systems Engineer
Corn Products International, Inc.
4501 Overdale Rd.
Winston Salem, NC   27107
336.785.8826 (office)
336.785.8809 (fax)
email - gbounds@xxxxxxxxxxxxx



 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Follow-Ups:

Re: [foxboro] ControlLogix - again.
From: Bakke, Richard A

References:
- Re: [foxboro] possible to directly get source, rather than point value?
  - From: William C Ricker

[foxboro] ControlLogix - again.

Other related posts: