[foxboro] CP40 to CP60 Fieldbus upgrade

From: "Bismarck Alban" <balban@xxxxxxxxxxxxxxxx>
To: <foxboro@xxxxxxxxxxxxx>
Date: Mon, 26 Jan 2004 12:58:28 -0500

Hi everyone

I´m looking for upgrade a CP40FT to CP60FT.
Actually, the CP40FT (attach: old_system.gif) have some
remote enclosures with Fieldbus Isolators Modules (FBI) and about
12 FBMs at each one.
The questions are:
1. could I maintain the existent FBI (as attach: new_system.gif)?
2. should i change all existent FBI to FBI10E?
3. should i change the existent Twisted pair shielding cable between the
    enclosures to 50 ohm coaxial cable?

Thanks for any suggestion

Bismarck Albán
Tecniequipos S.A.


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

References:

Re: [foxboro] IA System printing to Network printers
From: Jim Kahlden

[foxboro] CP40 to CP60 Fieldbus upgrade

Other related posts: