[foxboro] CP40 Insufficient Memory

From: "Rick Mol" <rdmol@xxxxxxxxxxxxxxx>
To: <foxboro@xxxxxxxxxxxxx>
Date: Wed, 20 Nov 2002 15:21:13 -0500

Hey Bunch,


I have a CP40 that has 530K free memory, 15K largest segment, per the station 
block.  There is a fairly large sequence that gives an "E35-INSUFFICIENT MEMORY 
FOR BLOCK" when I try to compile.

Any ideas, or am I looking at the dreaded CP reboot?


Regards,



Rick Mol
ESCO Company
IT/Automation Admin.
231.727.6409
rdmol@xxxxxxxxxxxxxxx

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Follow-Ups:

Re: [foxboro] CP40 Insufficient Memory
From: Mark Dumond

[foxboro] CP40 Insufficient Memory

Other related posts: