[foxboro] CP load thresh hold

List,
What would be the thresh hold where you would consider a ZCP270 to be heavily 
loaded and where you would advise to either re - phase or enable a new CP or 
one that has a lower load?

We usually look at the idle time load, which is more than 70% on all our CP's 
except for one, where it is below 70%
We have no overruns on any of our CP's


Ie:

"BLOCK MEAN LOAD (BPLOAD)";"4"
"CP MEAN LOAD (CPLOAD)";"44"
"I/O MEAN LOAD (IOLOAD)";"30.2"
"OM LOAD AVERAGE (OMLDAV)";"6.66667"
"% OF SEQUENCE BLOCK LOAD (SQLOAD)";"15.4"
"IDLE TIME (IDLETM)";"71.39"

Rgds,

Dirk

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
 

Other related posts: