[foxboro] CAD

I have a question concerning configuration of the Current Alarm Display

I would like to use the 'User Display' key to call up the graphic that
has the selected alarm on it.  The configuration for this is
straightforward however the display is allways called up in the
background behind the CAD.  The operator has to use the 'Front' key or
minimize the CAD to see the graphic.  Is there a parameter that can be
changed so that the CAD is not always 'on top'.  My local Foxboro
Service Rep says the CAD is supposed to stay 'on top'.  However from and
operations viewpoint this makes this feature useless.

Any help would be apreciated.=20

Alan D. Weldon
=20
Hunt Refining Company
1855 Fairlawn Road
Tuscaloosa, AL 35401
 Phone: (205) 391-3345
 Fax:     (205) 345-8769

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: