[foxboro] Alarms over ATS
- From: "Doucet, Terrence" <tdoucet@xxxxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Mon, 25 Feb 2008 08:06:00 -0500
List,
In existing three node IA system, there is one COM10 on Node 1. =20
Alarms for Node 1 are via Port 1
Alarms for Node 2 are via Port 2
Alarms for Node 3 are via Port 3
If the client replaces CLAN with MESH via ATS to communicate with legacy
IA, will alarms from Nodes 2 & 3 still work or do we need a serial port
on each node?
Thanks,
Terry
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: http://www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
- References:
- Re: [foxboro] Strange phenomenon while uploading the CP60's
- From: Boulay, Russ
Other related posts:
- » [foxboro] Alarms over ATS
- Re: [foxboro] Strange phenomenon while uploading the CP60's
- From: Boulay, Russ