[foxboro] Alarm horn

Hi,
Our Priority one alarms are configured to "sound horn" on all AW51
workstations (V6.1.1).
I have one priority one alarm that does not "sound horn", despite prined and
displayed.
How can I check "horns" configuration in connection with groups and
workstations.
Is there an enable/desable horn for compounds/blocks alarms?

Regards
Hafedh Ghodhbani
Sr C&I Eng
British Gas Tunisia
+21674259250




______________________________________________________________________
BG Energy Holdings Limited
Registered in England & Wales No: 3763515
Registered address:
100 Thames Valley Park Drive
Reading, Berkshire RG6 1PT  UK
Telephone: +44 (0)118 935 3222
Website: http://www.BG-Group.com

This e-mail is intended only for the addressee named above.  As this 
e-mail may contain confidential or privileged information, please 
advise us immediately if you are not the named addressee or the person 
responsible for delivering the message to the named addressee.  The 
contents should not be disclosed to any other person nor copies taken.
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: