[foxboro] Alarm Silence on Common Group Alarm Panels at 8.4.2

We just upgraded one Unit to MESH 8.4.2 from 8.2 and have encountered a
problem with all Annuciator keyboards in this area being able to silence
alarms from any WP in this area as still correctly defined in
/usr/fox/wp/data/commgrp.cfg. The annunciator key-boards tied to the
alarm destination WPs work fine, but the other annuciator keyboards on
WPs not receiving alarms no longer silence alarms, even though they did
at 8.2.
 

Anyone else experience this problem yet?

 

Jack Easley
Sr. I&C Technician
Luminant Power, Martin Lake Plant
Phone 903.836.6241
jack.easley@xxxxxxxxxxxx 

 


Confidentiality Notice: This email message, including any attachments, 
contains or may contain confidential information intended only for the 
addressee. If you are not an intended recipient of this message, be 
advised that any reading, dissemination, forwarding, printing, copying
or other use of this message or its attachments is strictly prohibited. If
you have received this message in error, please notify the sender 
immediately by reply message and delete this email message and any
attachments from your system. 

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: