[foxboro] About FoxA2 System.

Dear All Experts,
I am working on a project which is on FoxA2 system with T940 controller on
ELIN and 2500 series IOs on Profibus. 

I have some queries regarding Lintools and Control configuration.

1.      How can we use the Memory tags digital or analog because I did not
found any block which is memory block. I need it in different conditions
like if operator wants to turn on a motor then he will ON it through HMI
screen which will activate a digital memory tag and that tag will activate
the motor after checking the conditions or logic which is configured in
Lintools. Kindly advise the block type for memory operation.
2.      In Fox IA series when we use the PID block then we have feedback
input from the output but in A2 I did not find this, kindly advise how to
properly configure a PID in single and in cascade configuration, and how to
close the output the PID or the output of AO when an alarm occurs or through
a single digital input.
3.      When we build a sequence or ladder logic in file name "New Eurotherm
LIN Generic Sequence.uqd" then how to add it in the build list and download
list.

Thanks in advance and Best Regards,

Imran Butt,
System Engineer,
Manstock Engg.


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: