[foxboro] AW70X SOFT CP NOT WORKING

Hi folks,
I am setting up an AW70 w/control (AW70X) for training purposes, using I/A
NT version 6.5.1.
With Sysdef I defined a configuration containing a Nodebus Node, the AW70X
and GW30. The AW connects to the Nodebus through a DNBT.
I was able to program the GW30 with ICC, but I cannot access the "soft CP"
with ICC.
Every time I try to do so, an error message pops up: "AWCAP1 Communication
to CP (-23) Failed. Select CONTINUE to proceed" (AWCAP1 is the AW70X
letterbug). When I hit CONTINUE, another message pops up: "iuc_ or uc_open
failed. Select CONTINUE to proceed" and after hitting CONTINUE again, I get
the ICC Compound Selection screen. By the way, I think I should see the
compounds AWCAP1_STA and AWCAP1_ECB in the list, but they are not there.
In FoxSelect, the AWCAP1 station shows in red color.
In SMDH the AWCAP1 station shows in normal state.

Any ideas as to what may be the problems?
Thanks,
Pablo Lioi
Systems Engineer
TOTAL AUSTRAL - Argentina


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: