[foxboro] AW70 Connected to AB SLC 505 PLC's.

Is anyone out there using this approach? If so, we are wondering if you =
would recommend it to us. We are being pushed by a variety of people to =
use this in a non-critical installation for a material handling system =
that is geographically spread out.=20

The systems integrator that will be doing the bulk of the work for us has =
been told by Foxboro that this is the only approach for what we want to =
do. However, we do not have any AW70's on site and aren't looking forward =
to jumping on the NT bandwagon. Our preference would be to stick with an =
AW51 and connect it to the PLC's via ethernet.  We are worried about the =
robustness of the AW70 approach and about how much work we will have to do =
to port our display standards over to the NT system. Any advice is =
appreciated.

Dave Standerfer
Agrium US Inc.
Kenai, Alaska

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: