[foxboro] AW51E Mirror Backup on V6.5.1

Hi again List. I'm attemting a tape backup using an AIT2 tape and AIT2 tape 
drive. The station is an AW51E on V6.5.1 with external mirrored hard drives.
First I checked the status of the mirrored drives and everything is OK. Next, 
ran the "mirror_backup" and it appears to run with no problems. When the backup 
is complete it tells me the operation was successful and to store the tape 
away. The drives then re-mirror okay. But before I remove the tape I enter a 
"ufsrestore tvfs /dev/rst9 1" to read the tape back and verify that it's ok. I 
get the following message:

verify volume & initialize maps
media block size is 126
volume is not in dump format

This AW is on our simulator and is the only AW we have on V6.5.1. It's the only 
station I'm having difficulties backing up. Has anyone experienced a problem 
like this or maybe have any thoughts on something different I can try?

Thanks,
Travis


Travis Meredith
DCS Programmer
Albian Sands Energy Inc
P.O. Box 5670, Fort McMurray, Alberta, T9H 4W1, Canada

Tel: +1 780 713 4797
Email: travis.meredith@xxxxxxxxxxxxxx
Internet: http://www.albiansands.ca


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: