[foxboro] AW51D Box at Ver 6.5.2 (Two Problems)

Hi all


I have two problems with this box:

1) Snapshot program is very slow to start (up to 20 secs) and when it does I'm 
able to take a screen shot and then when I try Viewing the image in Image 
Viewer I get an hour glass and the image viewer never starts.  I can invoke it 
manually in VT100 but not with the snapshot program.  Therefore not able to 
Save as a Jpeg or Tif File.  Can anyone point out why this may be?


2) Unable to start an ICC session on this Box after a reboot.  It says it's 
running but never shows the window of the session.  I'm only able to get into 
it by killing the parent process and then going to a hummingbird terminal and 
remotely starting an ICC session.  This works ok and I can exit it and then go 
to the AW and everthing will work fine from this point on (that is I can start 
an ICC Session from the Host Box) until the box is rebooted and then the 
problem reappears.  Any help would be appreciated.

Thanks in advance.


Dale Gillis
Instrument Technician
Stora Enso Port Hawkesbury Ltd.
PO Box 9500
110 Pulpmill Road
Port Hawkesbury
Nova Scotia
Canada B9A 1A1


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: