[foxboro] AIM Datalink / Inform

Hi list,

Situation: AW (with AIM*Historian) and WP on a Windows nodebus system /
seperate stand alone PC, connected to the AW via second ethernet, running
AIM*Inform.

Does someone has bad experiences with such an AW going to a 100 % load,
caused by data requests from the stand alone PC, by means of the AIM Inform
(or Datalink) trying to get some non existing data out of the control
database.
Is there a chance that this can happen when you remove some datapoints from
the DCS database and forget to remove them also from the AIM configuration?

Thanks ahead for your responses,

Eric

******************************************
Eric Konings
Degussa Antwerpen N.V.
S-S0-T-E-EMRT
Tijsmanstunnel West
2040 ANTWERPEN
Tel: +32-3-560-3747
Fax: +32-3-560-3300
E-mail: eric.konings@xxxxxxxxxxx
*******************************************

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: