[foxboro] ACCUM Block With Period = 8 (1 Hour)

Thanks Chris,
It does sound like we stumbled on to something.  It is not a real issue
for us because we don't have to have any ACCUM blocks at 1 hour.  We can
always use a different period and adjust the MTRFAC.  I'm just glad to
know I'm not "seeing things" again.
Do any of the IPS (IOM) guys know if this has already been addressed in
V8.4 or should I look into submitting a CAR? 
Tom Badura
Plastics Engineering Company


-----Original Message-----

Chuck thanks for the tip.   You were correct about the smurfing.
Tom-  I set this block up last evening at approximately 5:15.  It is now
8:30 am and my total is 1256.9.  It should be 14000.  Thus I am getting
the
same mulitplier (89.8) as you.  It does seem as this is an issue with
V8.3.

Chris




 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: