[foxboro] ACCUM Block
- From: "BrianLong" <blong@xxxxxxx>
- To: "Foxboro" <foxboro@xxxxxxxxxxxxx>
- Date: Fri, 21 Oct 2005 14:55:35 -0500
Thanks to the group for the info on my ACCUM block reset question. Adding
the CP_STA:STATION.MINUTE.~X0000 to the CLEAR param was a simple solution
for us, plus I actually learned a few things yesterday. I didn't know that
there were extension "logic" options. (Francisco was kind enough to forward
me a few pages from chapter 6 in B0193AW describing the available extension
options.) I had also made that bad assumption that as long as the CLEAR
was TRUE the block didn't accumulate.
Brian Long
Arkansas Kraft
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
