[foxboro] AB BAS-T module connection to COMM10

Hello list,

Our system has a configured ALMPRT (set as LP02) using a COMM10 via switch
P0970VN all working fine. I am now trying to connect an Allen Bradley BAS-T
(basic) module via serial link to the Foxboro system using this same port. I
have tried various dip-switch configurations (on the P0970VN) incl. the
basic 3-wire - all with no effect. The BAS-T module can be _sent_ data when
I connect using a PC via hyperterminal (using 3 physical wires - RXD, TXD,
COMM). But as soon as I connect to the IA port, no-go, whether I use 3-wires
or all. Does anyone have any experience or suggestions on this

With thanks,

Wayne Curnuck
Power Instrumentation Pty Ltd
Australia
www.instrumentation.com.au
mailto:wayne@xxxxxxxxxxxxxxxxxxxxxx

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: