[foxboro] 3Q

Dear,
Can anybody reply to the following:

1. We have created two sets of a CP40  save_all in separate floppy disks.
While trying to load, we were able to load all components except one. Even
with fresh save_all the result is same. Any reason? what is the solution?

2. Had accessed HLBL sequence of an DEP block after closing (q!) had
received the following error:
                Sequence Editor, VT100 interface error (109) code 256,
Failed
any reason? what is the solution?

3. Tried to connect an external CD-ROM drive to an AW51E box and boot from
cdrom (Unix day 0 CD). Boot failed and AW is not booting. Our AW51E is not
having internal CD-ROM drive. also by mistake someone has deleted /dev
directory (rm /dev/*)!!! could you please suggest any solution?

Regards,
Jalil

 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: