[foxboro] 2nd Ethernet Port

I have read through some of the archives and see that several have posted =
that you can not use rmount on the 2nd Ethernet Port.  I have been using a =
Foxboro supplied script from the Power Application folks called "qc" or =
quick copy that uses the rmount command to copy displays around.  I have =
recently installed a 2nd Ethernet Port and now this utility no longer =
works and I assume it is because this script uses this rmount command.  =
Have any others had this same experience?  What commands do you use to =
copy displays to other stations using the 2nd Ethernet Port if rmount does =
not work?

Thanks,


Jim Kahlden
System Reliability Analyst
Lower Colorado River Authority
Fayette Power Project
6549 Power Plant Road
La Grange, TX 78945
(979) 249-8514 (Ph)
(979) 249-8390 (Fax)
jim.kahlden@xxxxxxxx
 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: