[foxboro] 1-5ma input on a FBM201

From: "Bruley, Peter T" <Peter.T.Bruley@xxxxxxxxxxxxxx>
To: "Foxboro@Freelists. Org (foxboro@xxxxxxxxxxxxx)" <foxboro@xxxxxxxxxxxxx>
Date: Tue, 29 Apr 2008 14:43:39 -0600

Gentlemen:
        I am trying to use a FBM201 to measure 1-5ma input.

        I am using an AIN & can scale the output to read 0-100% for 1-5ma in 
however I don't get the OOS/BAD i/o bits set when I go over/under the OSV

        The AIN block doesn't have a SCI for:  Linear 3200 to 1600 ( 1 to 5 mA)

        Is there any way to set the raw counts scale in the AIN block manually?


Thank You,

Peter Bruley

Plant Process Computer Analyst
Xcel Energy - Sherco Generating Plant
13999 Industrial Boulevard
Becker, MN, 55308
(763) 261-3821
Peter.T.Bruley@xxxxxxxxxxxxxx



 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Follow-Ups:

Re: [foxboro] 1-5ma input on a FBM201
From: Johnson, Alex P \(IPS\)

Re: [foxboro] 1-5ma input on a FBM201
From: Joseph M. Riccardi

[foxboro] 1-5ma input on a FBM201

Other related posts: