No, you cannot run X.400 on the Standard version, and copying files from the Enterprise edition to the Standard edition is not recommended, and is not supported and will more than likely be against the EULA. Mark Fugatt Dedicated Supportability Engineer (Exchange) Microsoft Services Organisation Desk: +44 (0)118 909 5630 Mobile: +44 (0)7966 858108 MSN IM: markfu@xxxxxxxxxxxxxxxxx Blog: http://blogs.technet.com/mfugatt Dedicated to proactively supporting Microsoft's enterprise Customers Mark Fugatt - Exchange DSE This email may contain confidential information. If you are not named on the addressee list, please take no action in relation to this email, do not open any attachment, and please contact the sender (details above) immediately. Information in this email is provided in good faith. If you are a customer of Microsoft, please refer to the terms and conditions which cover the provision of support and consulting services to you/your organization. If you are not corresponding in the course of, or in connection with a Microsoft contract or program with its own terms and conditions, please note that no liability is accepted by Microsoft for the contents of this mail. -----Original Message----- From: J Beets [mailto:jbeets@xxxxxxxxx] Sent: 14 November 2005 03:24 To: [ExchangeList] Subject: [exchangelist] X.400 Connector and Microsoft Echange Server 2003 http://www.MSExchange.org/ Hello Exchange experts, Markus Klein has an article: Implementing the X.400 Connector - Is It Worth Using with Exchange Server 2003? For us, for a potential client, it is - but can it be implemented with the "standard" edition? We wish to use the X.400 connector with Exchange Server 2003 "Standard" Edition and it only appears to be available with the "Enterprise" Edition. One can not add a TCP X.400 stack to the standard edition. Is it possible to copy some files from the enterprise edition to the standard edition to enable the x.400 connector? If so, which files, and where are they copied to? In Exchange 5.5 I believe the X.400 connector files came on a disk so are probably just a few dll files. We want the X.400 connector capability without the other features (and expense) of the Enterprise edition. Is this possible? Thanks for your help! ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp ------------------------------------------------------ Visit TechGenix.com for more information about our other sites: http://www.techgenix.com ------------------------------------------------------ You are currently subscribed to this MSExchange.org Discussion List as: markfu@xxxxxxxxxxxxx To unsubscribe visit http://www.webelists.com/cgi/lyris.pl?enter=exchangelist Report abuse to listadmin@xxxxxxxxxxxxxx