RE: Scheduled hourly backups

  • From: "Michael Bonnice" <whadmin@xxxxxxxxxxxxxx>
  • To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
  • Date: Tue, 7 Jan 2003 10:34:12 +1000

MessageThanks,

Would that be the whole of MDBDATA directory ? if i did copy these over to 
another location every hour would there be an issue with file locking and 
multiple access ?

Regards,

Michael


  ----- Original Message ----- 
  From: Joe Kinne 
  To: [ExchangeList] 
  Sent: Tuesday, January 07, 2003 8:13 AM
  Subject: [exchangelist] RE: Scheduled hourly backups


  http://www.MSExchange.org/

  Rather than backing up the whole message store all you should need to backup 
would be the Log files (assuming that you are getting a valid online backup 
every night and clearing the logs (so no recursive logging).   Then if you have 
a critical failure and lose the server, you should be able to restore the 
server from the arcserve tape, restore the logs from the IDE drive, and be 
right back to where your were.

  --Joe
    -----Original Message-----
    From: Michael Bonnice [mailto:whadmin@xxxxxxxxxxxxxx] 
    Sent: Sunday, January 05, 2003 3:45 PM
    To: [ExchangeList]
    Subject: [exchangelist] Scheduled hourly backups


    http://www.MSExchange.org/

    Hi all,

    Just a query about backing up exchange mailboxes, I currently have a =
    batch file running every hour on a Exchange 2000 server which is also my =
    DC backing up all users folders - documents ect..

    I would also like to backup all users mailboxes every hour but i am not =
    sure which way to go about it. The reason why is because our current =
    server's service agreement is on a return to base basis. So if something =
    goes wrong we are without a server! - not my doing.

    So, I have installed a IDE drive along with the RAID array so that these =
    hourly backups will be on my IDE which i will pull out and put in =
    another machine if i lose the server.

    I could backup the mailbox store, but without an exchange server it =
    wouldnt be very usefull , Or i could backup the entire MBX directory =
    from the M: drive but this can timely.

    Any suggestions would be greatly appreciated.

    Note: We do a full tape backup everynight with ARCserv with exchange =
    backup agent.

    Regards,

    Michael

    ------------------------------------------------------
    List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
    Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
    Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
    ------------------------------------------------------
    ISA Server Resource Site: http://www.isaserver.org
    Windows Security Resource Site: http://www.windowsecurity.com/
    Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
    ------------------------------------------------------
    You are currently subscribed to this MSExchange.org Discussion List as: 
exchlist@xxxxxxxxxxxxxxxxx
    To unsubscribe send a blank email to $subst('Email.Unsub') 
  ------------------------------------------------------
  List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
  Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
  Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
  ------------------------------------------------------
  ISA Server Resource Site: http://www.isaserver.org
  Windows Security Resource Site: http://www.windowsecurity.com/
  Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
  ------------------------------------------------------
  You are currently subscribed to this MSExchange.org Discussion List as: 
whadmin@xxxxxxxxxxxxxx
  To unsubscribe send a blank email to $subst('Email.Unsub') 

Other related posts: