Re: STILL unable to receive mail from OUTSIDE!!!

  • From: "Marvin Cummings" <marvc@xxxxxxxxxxxxx>
  • To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
  • Date: Mon, 24 Jun 2002 11:30:07 -0400

Oops...forgot to turn my web server back on. Hey matt can you try it now.
The only problem appears to be with the mail server, but I think you should
be able to get a hit on both nubiint.com & mail.nubiint.com

Thanks for any assistance on this

-----Original Message-----
From: Walkowiak, Matt [mailto:Matt.Walkowiak@xxxxxxxxxxxx]
Sent: Monday, June 24, 2002 10:24 AM
To: [ExchangeList]
Subject: [exchangelist] Re: STILL unable to receive mail from OUTSIDE!!!


http://www.MSExchange.org/ - Re-Vamped!


Marvin-

I just did an nslookup on nubiint.com - no good.  Check out my results
below...
*******************************
C:\>nslookup
Default Server:  ns2.gofast.net
Address:  209.46.63.6

> nubiint.com
Server:  ns2.gofast.net
Address:  209.46.63.6

Name:    nubiint.com
Address:  0.0.0.0

> mail.nubiint.com
Server:  ns2.gofast.net
Address:  209.46.63.6

Name:    mail.nubiint.com
Address:  0.0.0.0
*********************************

Looks like your DNS is fubar...  I'd work on that one right quick.
Once you have that working (because it looks like it was working at one
point from your error messages) I would bet that your exchange server
does not realize that it is the final resting place for mail going to
nubiint.com and expects to forward the mail somewhere else, and since
your yahoo account is not allowed to relay off of your exchange server
(relay another word for route or "pass thru") you get that error.

And I think IMS stands for Internet Messaging Service, or something like
that.  It's the code that connects your Departmental Exchange server
(messaging server that passes e-mail between accounts that are local) to
all the mail servers on the Internet.

Also, don't worry about ports 110, 80, 113 or other ports for a while -
all you care about now is 25.  In fact, turn em off at your router for
now to keep from confusing the situation.
"telnet mail.nubiint.com 25"

Since this is a home network, you might wanna start thinking about
starting over?  There are too many variables to check with a messaging
application as large as Exchange.  You're probably setting this network
up to learn how to use the software, but getting frustrated over it does
no one any good.  Exchange is relatively easy in its default
configuration.

Matt Walkowiak




-----Original Message-----
From: Marvin Cummings [mailto:marvc@xxxxxxxxxxxxx]
Sent: Monday, June 24, 2002 7:11 AM
To: [ExchangeList]
Subject: [exchangelist] Re: STILL unable to receive mail from OUTSIDE!!!

http://www.MSExchange.org/ - Re-Vamped!


I tried to send mail to myself from hotmail and it returned the
following
error:
Delivery to the following recipients failed.
       marvc@xxxxxxxxxxx
Final-Recipient: rfc822;marvc@xxxxxxxxxxx
Action: failed
Status: 5.7.1
Diagnostic-Code: smtp;550 5.7.1 Unable to relay for marvc@xxxxxxxxxxx

Recieve a coonection to host lost whenever I try to telnet to 110 on the
mail server.

-----Original Message-----
From: )?), [mailto:fatal_x@xxxxxxxxx]
Sent: Monday, June 24, 2002 4:47 AM
To: [ExchangeList]
Subject: [exchangelist] Re: STILL unable to receive mail from OUTSIDE!!!


http://www.MSExchange.org/ - Re-Vamped!


can u telnet on port 110?

if u use a web based email acount, does it return your
mail? whats the error?

--- Marvin Cummings <marvc@xxxxxxxxxxxxx> wrote:
> http://www.MSExchange.org/ - Re-Vamped!
>
>
> Can someone PLEASE!!!! help me with this error?????
> This is Ex2k on my home
> network. I can send mail internally and to the
> outside without any problems.
> I'm unable to recieve any mail from the outside from
> any of my accounts.
>
> .net 007: This e-mail message was undeliverable due
> to the
> following reason:
>
> .net 018: Each of the following recipients were
> rejected by a
> destination mail system.
>
> Note: The reasons given by the destination mail
> system are included
> to help you determine why each recipient was
> rejected.
>
> Solution:
> Attempt to resend, or contact the recipient by
> alternate means to let
> them know about the issue.
>
>     Recipient: <marvc@xxxxxxxxxx>
>     Reason:    5.7.1 Unable to relay for
> marvc@xxxxxxxxxx
>
> I've published the mail server via port 25 on my
> router, the IP address of
> the Default SMTP Virtual Server Properties is set to
> the internal ip of the
> server with logging enabled.
> Connection Control is set to "Only the list below"
> and includes the IP
> address of the internal DNS server for the domain.
> Relay is set to "Only the list below" and includes
> the IP address of the
> internal DNS server for the domain. Do I need to add
> the ip address of the
> internal email server also?
> I'm currently using the Default Recipients Policy
> which has the SMTP & X400
> @domain.com types already configured. Should I
> create a new recipient
> policy?
>
> Any help on this is appreciated.
>
>
>
>
------------------------------------------------------
> You are currently subscribed to this MSExchange.org
> Discussion List as: fatal_X@xxxxxxxxx
> To unsubscribe send a blank email to
$subst('Email.Unsub')


__________________________________________________
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com

------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
marvc@xxxxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')


------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
matt.walkowiak@xxxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')

------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
marvc@xxxxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')



Other related posts: