RE: SMTP 25

  • From: Joe Kinne <JoeK@xxxxxxxxxxxxxxxxx>
  • To: "'[ExchangeList]'" <exchangelist@xxxxxxxxxxxxx>
  • Date: Tue, 12 Nov 2002 10:44:48 -0800

The question is why do you want to change to another port?   If you want
your firewall to receive messages to port 25 and then forward them to
exchange on a different port.  Yes it can be done, check the knowledgebase
for "IMS SMTP Port".  You will also have to have your Firewall translate
from the other port to port 25 when you send outbound mail as well.

--Joe

-----Original Message-----
From: Mark Fugatt [mailto:mark@xxxxxxxxx] 
Sent: Tuesday, November 12, 2002 9:25 AM
To: [ExchangeList]
Subject: [exchangelist] RE: SMTP 25


http://www.MSExchange.org/

It depends!!!

If this is the primary server responsible for receiving your incoming mail,
then the answer is no, if it is listening on a different port other servers
on the Net will not be able to establish a connection.

Mark Fugatt
Pentech Office Solutions Inc
www.4mcts.com
www.exchangetrainer.com
Tel:  585 586 3890
Fax: 585 249 0316
Cell: 585 576 4750
Visit www.msexchange.org for valuable information about Microsoft Exchange


-----Original Message-----
From: Morriz [mailto:mauri.fox@xxxxxxxxxx]
Sent: Tuesday, November 12, 2002 11:38 AM
To: [ExchangeList]
Subject: [exchangelist] SMTP 25


http://www.MSExchange.org/

Hi!
Is it possible to run a mailserver on other port besides port 25?


/M

------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/ Windows
2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
mark@xxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')




------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/ Windows
2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
exchlist@xxxxxxxxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')


Other related posts: