RE: Receive and send email from different LAN' s

  • From: Administrator - Beaconsfield School <Administrator@xxxxxxxxxxxxxxxxxxxxxxxxx>
  • To: "'[ExchangeList]'" <exchangelist@xxxxxxxxxxxxx>
  • Date: Fri, 24 May 2002 15:58:54 +0100

What do you mean by "get the users on the other lan to set their mailboxes
to synchronize with the exchange server " How is this done?
> ----------
> From:         Gami, Paresh
> Reply To:     [ExchangeList]
> Sent:         24 May 2002 15:15
> To:   [ExchangeList]
> Subject:      [exchangelist] RE: Receive and send email from different
> LAN'    s
> 
> http://www.MSExchange.org/ - Re-Vamped!
> 
> 
> set up mailboxes in the exchange server, get the users on the other lan to
> set their mailboxes to synchronize with the exchange server, i have a set
> up where this works over a isdn connection.
> 
> Paresh
> 
> -----Original Message-----
> From: Administrator - Beaconsfield School
> [mailto:Administrator@xxxxxxxxxxxxxxxxxxxxxxxxx]
> Sent: 24 May 2002 15:11
> To: [ExchangeList]
> Subject: [exchangelist] RE: Receive and send email from different LAN' s
> 
> 
> http://www.MSExchange.org/ - Re-Vamped!
> 
> 
> No, only one server runs Exchange 5.5 and the other does not have a
> Exchange
> 5.5 installed. Is there any way where the users in the other network be
> given email access without installing Exchange 5.5 in their server, if not
> is there any other alternative for this?
> 
> Thank you
> Prince Rozario
> 
> > ----------
> > From:       Lomker, Michael
> > Reply To:   [ExchangeList]
> > Sent:       24 May 2002 14:46
> > To:         [ExchangeList]
> > Subject:    [exchangelist] RE: Receive and send email from different
> > LAN's
> > 
> > http://www.MSExchange.org/ - Re-Vamped!
> > 
> > 
> > > We have two servers running in two different LAN's. Only one 
> > > server runs Exchange Server 5.5. 
> > 
> > I assume one is running e2k and the other 5.5.  It can be done fairly
> > easily if both servers are installed in the same Exchange organization.
> I
> > had to do this, myself:
> > 
> > http://support.microsoft.com/default.aspx?scid=kb;en-us;Q300129
> > 
> > 
> > 
> > 
> > ------------------------------------------------------
> > You are currently subscribed to this MSExchange.org Discussion List as:
> > administrator@xxxxxxxxxxxxxxxxxxxxxxxxx
> > To unsubscribe send a blank email to
> > $subst('Email.Unsub')
> > 
> 
> ------------------------------------------------------
> You are currently subscribed to this MSExchange.org Discussion List as:
> pgami@xxxxxxxxxxxxxxx
> To unsubscribe send a blank email to
> $subst('Email.Unsub')
> 
> _____________________________________________________________________
> This message has been checked for all known viruses by the MessageLabs
> Virus Control Centre.
> 
> This message is confidential and may contain privileged information. It is
> for the named intended recipient only. If you receive it in error please
> e-mail the sender at the address above to notify us and destroy the
> original message, not keeping a copy. It is possible for e-mails to be
> intercepted or affected by viruses. Whilst we maintain virus checks on
> inbound e-mails, we accept no liability for viruses or other material
> introduced with this message.
> ___________________________________________________________________
> This message has been checked for all known viruses by the MessageLabs
> Virus Control Centre.
> 
> ------------------------------------------------------
> You are currently subscribed to this MSExchange.org Discussion List as:
> administrator@xxxxxxxxxxxxxxxxxxxxxxxxx
> To unsubscribe send a blank email to
> $subst('Email.Unsub')
> 


Other related posts: