RE: RGC connector

  • From: "Chris Wall" <Chris.Wall@xxxxxxxxxxxxxxxxxxx>
  • To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
  • Date: Thu, 29 Dec 2005 13:12:09 -0500

Are you trying to create the RGC for RG2 to RG3 from a server in RG1?
If not, try that. 





From: Manjeet Singh [mailto:Manjeet.Singh@xxxxxxxxxxx] 
Sent: Wednesday, December 28, 2005 11:18 PM
To: [ExchangeList]
Subject: [exchangelist] RGC connector

My setup test setup (Windows 2003 with Exchange 2003) has:


Three Exchange servers are in three different routing groups. Ex1 in
RG1, Ex2 in RG2, Ex3 in RG3

Now when I am creating routing group connector I can not create a direct
connector from R2 to RG3. Actually RG3 server is not shown in remote
bridge head list.


I can create connector from RG1 to RG3 and vice versa.

I can create RG1 to RG2 and vice versa.  


So flaw in my current setup is that when Ex3 will send mails to Ex2 then
it will first go to Ex1 and then Ex1 deliver it to Ex2.


I can not create a direct RGC connector from RGC3 to RGC2 or vice versa
because the servers are shown in remote bridge head server while
creating the connector.

I Google but did not find anything related to it.


Please help


List Archives:
Exchange Newsletters: 
Visit for more information about our other sites:
You are currently subscribed to this Discussion List as:
To unsubscribe visit
Report abuse to info@xxxxxxxxxxxxxx 

Other related posts: