Re: RAID in Exchange

  • From: Jeffrey Adzima <jeff@xxxxxxxxxxxx>
  • To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
  • Date: Fri, 15 Nov 2002 08:56:17 -0800

I would highly recommend that you get some very basic computer hardware and software training, and then make some attempts at building some microsoft boxes for 'fun,' play with them ALOT, crash them, fix them, recrash them and refix them as many times as you can. And then, I'd highly recommend you hire a consultant to help you.

I only say this because I've been at it for over 20 years, and I still go to school, and the learning never ends and I still seek counsel from many and still have problems.

My .02

Jeff

At 11/15/2002, you wrote:
http://www.MSExchange.org/
I am a new in IT World and have a stupid question , I've ever post this message but never get an answer. I want to build Exchange Server. and I plan to use several HD (I use all IDE both primary and secondary) , they say I could improve performance by using RAID0 or RAID5 because every harddisk use its own controller. Can I use that ? or anyone have an idea ?
and sometimes I confuse about harddisk contoller. a friend told me that it's on the harddisk ( PCB attached to Harddisk) but someone else told me that it's on the motherboard or separate card.
I don't know which one is correct .



The confused


----- Original Message -----
From: <mailto:mark@xxxxxxxxx>Mark Fugatt
To: <mailto:exchangelist@xxxxxxxxxxxxx>[ExchangeList]
Sent: Friday, November 15, 2002 3:06 AM
Subject: [exchangelist] RE: Exchange Admin

<http://www.MSExchange.org/>http://www.MSExchange.org/
Microsofts official answer is to use Microsoft Terminal Services, but this method has worked for me and many others, but it is not supported by Microsoft.


1. Install Microsoft Windows 2000 SP2 Admin Pack
2. Install Exchange 2000 System Manager
3. Install Exchange 2000 SP2
4. Uninstall Windows 2000 SP2 Admin Pack
5. Install Windows .NET Server Beta Admin Pack

Mark Fugatt
Pentech Office Solutions Inc
www.4mcts.com
www.exchangetrainer.com
Tel:  585 586 3890
Fax: 585 249 0316
Cell: 585 576 4750
Visit www.msexchange.org for valuable information about Microsoft Exchange
-----Original Message-----
From: Eric Lanyon [mailto:ELanyon@xxxxxxx]
Sent: Thursday, November 14, 2002 1:48 PM
To: [ExchangeList]
Subject: [exchangelist] Exchange Admin



http://www.MSExchange.org/
I have a really stupid question. I want to admin my Exchange 2000 server from my desktop. If memory serves, I need to install a portion of Exchange onto my local machine. When I do that, it says I don't have Windows 2000 Admin Tools loaded, but I do. Am I going about it wrong? My PC is WinXP Pro.



------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as: jeff.horton@xxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as: exchlist@xxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')


------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as: mark@xxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')


------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as: boedy@xxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as: jeff@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')

Other related posts: