[ExchangeList] Re: Problem with relaying for authenticated users

  • From: "John T \(Lists\)" <johnlist@xxxxxxxxxxxxxxxxxxx>
  • To: <exchangelist@xxxxxxxxxxxxx>
  • Date: Wed, 9 Aug 2006 14:38:03 -0700

This is indicating that Exchange is not configured to require
authentication. Also, have you added any other software to the server such
as AV or anti-spam or anything?

 

John T

eServices For You

 

"Seek, and ye shall find!"

 

-----Original Message-----
From: exchangelist-bounce@xxxxxxxxxxxxx
[mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of Evan Mann
Sent: Wednesday, August 09, 2006 12:24 PM
To: exchangelist@xxxxxxxxxxxxx
Subject: [ExchangeList] RE: [ExchangeList] Re: Problem with relaying for
authenticated users

 

Setup has been in place 2 years now or so.  I only get this when I sent to
non-hosted e-mail addresses.  I can send to any email address hosted on the
exchange server fine.  You don't even need the check box for outbound mail
server requires authentication to send to addresses hosted on the server.

 

I'm almost positive this worked in the past, possibly before SP2.. hmmm

 

  _____  

From: exchangelist-bounce@xxxxxxxxxxxxx
[mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of
ChongJa@xxxxxxxxxxxxxxxx
Sent: Wednesday, August 09, 2006 3:19 PM
To: exchangelist@xxxxxxxxxxxxx
Subject: [ExchangeList] Re: Problem with relaying for authenticated users

Is this a new setup? You get this when you send to any address? Run Exchange
Best Practice analyzer, possible there may be some misconfiguration within
your SMTP VS. 

 

  _____  

From: exchangelist-bounce@xxxxxxxxxxxxx
[mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of Evan Mann
Sent: Wednesday, August 09, 2006 3:02 PM
To: exchangelist@xxxxxxxxxxxxx
Subject: [ExchangeList] Problem with relaying for authenticated users

 

Exchange 2003 SP2.

 

Users get an error 550, recipient address rejected.  no such user if they
try to relay through the mail server.  I'm doing tests using Outlook 2003
setup for IMAP.  I enabled the advanced settings to require authentication
on the outbound mail server., and the default relaying options are enabled
which should allow this to work.  I double-checked.


I must be missing something obvious here? 

 

Other related posts: