RE: Problem in express

  • From: "Raed M. Dummor" <raed@xxxxxxxxxxx>
  • To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
  • Date: Thu, 5 Sep 2002 12:06:41 +0200

 Hi 

Yes there was an error in the subnet mask , I recognize this after a
while ,
Thanks for your effort .


Raed 

-----Original Message-----
From: Robert Abela [mailto:robert@xxxxxxx <mailto:robert@xxxxxxx> ] 
Sent: Thursday, September 05, 2002 11:00 AM
To: [ExchangeList]
Subject: [exchangelist] RE: Problem in express


http://www.MSExchange.org/ <http://www.MSExchange.org/> 

Could it be that the subnet was wrong? Are you behind a NAT or something
similar?

-----Original Message-----
From: Raed M. Dummor [mailto:raed@xxxxxxxxxxx <mailto:raed@xxxxxxxxxxx>
]
Sent: Thursday, September 05, 2002 11:52 AM
To: [ExchangeList]
Subject: [exchangelist] RE: Problem in express


http://www.MSExchange.org/ <http://www.MSExchange.org/> 

This is very strange , my ip address is within the range, but did not
send  , after I have added as a single ip address , the problem have
gone !!! 

Raed 

-----Original Message-----
From: Robert Abela [mailto:robert@xxxxxxx <mailto:robert@xxxxxxx>
<mailto:robert@xxxxxxx <mailto:robert@xxxxxxx> > ] 
Sent: Thursday, September 05, 2002 10:41 AM
To: [ExchangeList]
Subject: [exchangelist] RE: Problem in express


http://www.MSExchange.org/ <http://www.MSExchange.org/>
<http://www.MSExchange.org/ <http://www.MSExchange.org/> > 

Telnet the exchange again and when you say "HELO" check what ip it gives
you.  Then check that the ip is in the relaying list of exchange.  It
will let you send mails to your company cause it is like recieving an
external mail to your company.  Let me know how it goes.

-----Original Message-----
From: Raed M. Dummor [mailto:raed@xxxxxxxxxxx <mailto:raed@xxxxxxxxxxx>
<mailto:raed@xxxxxxxxxxx <mailto:raed@xxxxxxxxxxx> > ]
Sent: Thursday, September 05, 2002 11:22 AM
To: [ExchangeList]
Subject: [exchangelist] RE: Problem in express


http://www.MSExchange.org/ <http://www.MSExchange.org/>
<http://www.MSExchange.org/ <http://www.MSExchange.org/> > 

Hi 
I have telneted  to my server  on port 25 and tried  to send , I can
receive from every ware inside and outside , but I can only send to
inside my company , but outside I  cant , and I got this " 550 5.7.1
Unable to relay for  " .

Raed 
 

-----Original Message-----
From: Robert Abela [mailto:robert@xxxxxxx <mailto:robert@xxxxxxx>
<mailto:robert@xxxxxxx <mailto:robert@xxxxxxx> > <mailto:robert@xxxxxxx
<mailto:robert@xxxxxxx>  <mailto:robert@xxxxxxx <mailto:robert@xxxxxxx>
> > ] 
Sent: Thursday, September 05, 2002 10:06 AM
To: [ExchangeList]
Subject: [exchangelist] RE: Problem in express


http://www.MSExchange.org/ <http://www.MSExchange.org/>
<http://www.MSExchange.org/ <http://www.MSExchange.org/> >
<http://www.MSExchange.org/ <http://www.MSExchange.org/>
<http://www.MSExchange.org/ <http://www.MSExchange.org/> > > 

The problem you are having is "Unable to relay on exchange".  If you try
to telnet the server on port 25 are you able to send mails?  cause the
problem is with sending mails not recieving.. right?

-----Original Message-----
From: Raed M. Dummor [mailto:raed@xxxxxxxxxxx <mailto:raed@xxxxxxxxxxx>
<mailto:raed@xxxxxxxxxxx <mailto:raed@xxxxxxxxxxx> >
<mailto:raed@xxxxxxxxxxx <mailto:raed@xxxxxxxxxxx>
<mailto:raed@xxxxxxxxxxx <mailto:raed@xxxxxxxxxxx> > > ]
Sent: Thursday, September 05, 2002 11:00 AM
To: [ExchangeList]
Subject: [exchangelist] RE: Problem in express


http://www.MSExchange.org/ <http://www.MSExchange.org/>
<http://www.MSExchange.org/ <http://www.MSExchange.org/> >
<http://www.MSExchange.org/ <http://www.MSExchange.org/>
<http://www.MSExchange.org/ <http://www.MSExchange.org/> > > 

Hi 
 
the problem is still even with the IMAP .
 
Raed
 
-----Original Message-----
From: Saleh Eqal [mailto:saleh_eqal@xxxxxxxxxxxxxxx
<mailto:saleh_eqal@xxxxxxxxxxxxxxx> 
<mailto:saleh_eqal@xxxxxxxxxxxxxxx <mailto:saleh_eqal@xxxxxxxxxxxxxxx> >

<mailto:saleh_eqal@xxxxxxxxxxxxxxx <mailto:saleh_eqal@xxxxxxxxxxxxxxx>
<mailto:saleh_eqal@xxxxxxxxxxxxxxx <mailto:saleh_eqal@xxxxxxxxxxxxxxx> >
> ] 
Sent: Thursday, September 05, 2002 9:26 AM
To: [ExchangeList]
Subject: [exchangelist] RE: Problem in express



        http://www.MSExchange.org/ <http://www.MSExchange.org/>
<http://www.MSExchange.org/ <http://www.MSExchange.org/> >
<http://www.MSExchange.org/ <http://www.MSExchange.org/>
<http://www.MSExchange.org/ <http://www.MSExchange.org/> > > 
        
        

        Try using the IMAP protocol instead of POP. (If you have setup
your server to use the IMAP) 
        -----Original Message----- 
        From: Raed M. Dummor [ mailto:raed@xxxxxxxxxxx
<mailto:raed@xxxxxxxxxxx>  <mailto:raed@xxxxxxxxxxx
<mailto:raed@xxxxxxxxxxx> >  <mailto:raed@xxxxxxxxxxx
<mailto:raed@xxxxxxxxxxx>  <mailto:raed@xxxxxxxxxxx
<mailto:raed@xxxxxxxxxxx> > > ] 
        Sent: Thursday, September 05, 2002 10:59 AM 
        To: [ExchangeList] 
        Subject: [exchangelist] RE: Problem in express 


        http://www.MSExchange.org/ <http://www.MSExchange.org/>
<http://www.MSExchange.org/ <http://www.MSExchange.org/> >
<http://www.MSExchange.org/ <http://www.MSExchange.org/>
<http://www.MSExchange.org/ <http://www.MSExchange.org/> > >  

        Hi 
        I think my setting in express is corrected ,and it was working
in the 
        past without problems , but I  think there is something need to
be fixed 
        in exchange server , I can receive and send without  problems if
I used 
        my setting in exchange , but when using the pop instead of
exchange  I 
        got this . 
          
          
        Raed 
          
          
        -----Original Message----- 
        From: Saleh Eqal [ mailto:saleh_eqal@xxxxxxxxxxxxxxx
<mailto:saleh_eqal@xxxxxxxxxxxxxxx>  <mailto:saleh_eqal@xxxxxxxxxxxxxxx
<mailto:saleh_eqal@xxxxxxxxxxxxxxx> >
<mailto:saleh_eqal@xxxxxxxxxxxxxxx <mailto:saleh_eqal@xxxxxxxxxxxxxxx> 
<mailto:saleh_eqal@xxxxxxxxxxxxxxx <mailto:saleh_eqal@xxxxxxxxxxxxxxx> >
> ] 
        Sent: Thursday, September 05, 2002 8:18 AM 
        To: [ExchangeList] 
        Subject: [exchangelist] RE: Problem in express 



                http://www.MSExchange.org/ <http://www.MSExchange.org/>
<http://www.MSExchange.org/ <http://www.MSExchange.org/> >
<http://www.MSExchange.org/ <http://www.MSExchange.org/>
<http://www.MSExchange.org/ <http://www.MSExchange.org/> > >

                

                dear Raed, 

                Make sure the e-mail address is correct. Also make sure
of the 
        protocols and the server name in your settings. 

                 Regards 
                Saleh Eqal 
                IT Manager 
                HAJ 

                -----Original Message----- 
                From: Raed M. Dummor [ mailto:raed@xxxxxxxxxxx
<mailto:raed@xxxxxxxxxxx>  <mailto:raed@xxxxxxxxxxx
<mailto:raed@xxxxxxxxxxx> >  <mailto:raed@xxxxxxxxxxx
<mailto:raed@xxxxxxxxxxx>  <mailto:raed@xxxxxxxxxxx
<mailto:raed@xxxxxxxxxxx> > > ] 
                Sent: Thursday, September 05, 2002 10:04 AM 
                To: [ExchangeList] 
                Subject: [exchangelist] Problem in express 


                http://www.MSExchange.org/ <http://www.MSExchange.org/>
<http://www.MSExchange.org/ <http://www.MSExchange.org/> >
<http://www.MSExchange.org/ <http://www.MSExchange.org/>
<http://www.MSExchange.org/ <http://www.MSExchange.org/> > >


                Hi 
                Could any one guide me in this while using outlook
express  I 
        have got 
                this error message . 

                The message could not be sent because one of the
recipients was 
        rejected 
                by the server. The rejected e-mail address was
'----------'. 
        Subject 
                -----', Account: '------', Server: '-----------',
Protocol: 
        SMTP, Server 
                Response: '550 5.7.1 Unable to relay for -----', Port:
25, 
        Secure(SSL): 
                No, Server Error: 550, Error Number: 0x800CCC79 



                Regards 
                Raed 

                ------------------------------------------------------ 
                You are currently subscribed to this MSExchange.org
Discussion 
        List as: saleh_eqal@xxxxxxxxxxxxxxx 
                To unsubscribe send a blank email to 
        $subst('Email.Unsub') 

                ------------------------------------------------------ 
                You are currently subscribed to this MSExchange.org
Discussion 
        List as: raed@xxxxxxxxxxx 
                To unsubscribe send a blank email to 
        $subst('Email.Unsub') 


        ------------------------------------------------------ 
        You are currently subscribed to this MSExchange.org Discussion
List as: saleh_eqal@xxxxxxxxxxxxxxx 
        To unsubscribe send a blank email to
$subst('Email.Unsub') 

        ------------------------------------------------------
        You are currently subscribed to this MSExchange.org Discussion
List as: raed@xxxxxxxxxxx
        To unsubscribe send a blank email to
$subst('Email.Unsub') 


------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
robert@xxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')

This mail was content checked for malicious code and viruses
by GFI MailSecurity. GFI MailSecurity provides email content 
checking, exploit detection and anti-virus for Exchange & 
SMTP servers. Spam, viruses, dangerous attachments and offensive content
are removed automatically. Key features 
include: Multiple virus engines; Email content & attachment 
checking; Exploit shield - email intrusion detection & defence; 
Email threats engine - analyses & defuses HTML scripts, 
.exe files & more. 



In addition to GFI MailSecurity, GFI also produces the GFI 
FAXmaker fax server & GFI LANguard network security product 
ranges. For more information on our products, please visit 
http://www.gfi.com <http://www.gfi.com>  <http://www.gfi.com
<http://www.gfi.com> >  <http://www.gfi.com <http://www.gfi.com>
<http://www.gfi.com <http://www.gfi.com> > > . This disclaimer was sent
by GFI MailEssentials 
for Exchange/SMTP.



------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
raed@xxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')

------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
robert@xxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')

This mail was content checked for malicious code and viruses
by GFI MailSecurity. GFI MailSecurity provides email content 
checking, exploit detection and anti-virus for Exchange & 
SMTP servers. Spam, viruses, dangerous attachments and offensive content
are removed automatically. Key features 
include: Multiple virus engines; Email content & attachment 
checking; Exploit shield - email intrusion detection & defence; 
Email threats engine - analyses & defuses HTML scripts, 
.exe files & more. 



In addition to GFI MailSecurity, GFI also produces the GFI 
FAXmaker fax server & GFI LANguard network security product 
ranges. For more information on our products, please visit 
http://www.gfi.com <http://www.gfi.com>  <http://www.gfi.com
<http://www.gfi.com> > . This disclaimer was sent by GFI MailEssentials 
for Exchange/SMTP.



------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
raed@xxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')

------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
robert@xxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')

This mail was content checked for malicious code and viruses
by GFI MailSecurity. GFI MailSecurity provides email content 
checking, exploit detection and anti-virus for Exchange & 
SMTP servers. Spam, viruses, dangerous attachments and offensive content
are removed automatically. Key features 
include: Multiple virus engines; Email content & attachment 
checking; Exploit shield - email intrusion detection & defence; 
Email threats engine - analyses & defuses HTML scripts, 
.exe files & more. 



In addition to GFI MailSecurity, GFI also produces the GFI 
FAXmaker fax server & GFI LANguard network security product 
ranges. For more information on our products, please visit 
http://www.gfi.com <http://www.gfi.com> . This disclaimer was sent by
GFI MailEssentials 
for Exchange/SMTP.



------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
raed@xxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')


Other related posts: