http://www.msexchange.org -------------------------------------------------------Hi! Our company has recently purchased new hardware to run exchange on. We currently have an Exchange 2003 SP2 cluster running on two Dell PowerEdge 2650's with a Powervault 220s as shared storage. We purchased two new HP Proliant DL380's and an HP MA-500 G2 to run the new cluster on. With the old cluster still in place and sending mail for all other users, I set up Exchange 2003 SP2 on the new cluster, and created a test user. The test user can send internal email and external email just fine. The test user cannot, however receive any mail, whether it is external or internal. I realize our firewall setup (ISA 2004 SP2) will prohibit external mail until we publish the new mail server. Internal mail should go through, but it is not. Any suggestions? PS- FQDN's are different on the two clusters, both clusters are in the same organization, same routing group, and no connectors are configured at this point. The Exchange organization is using the default reciepient policy. Thanks for the help! John Wilson ------------------------------------------------------- List Archives: //www.freelists.org/archives/exchangelist/ MSExchange Newsletter: http://www.msexchange.org/pages/newsletter.asp MSExchange Articles and Tutorials: http://www.msexchange.org/articles_tutorials/ MSExchange Blogs: http://blogs.msexchange.org/ ------------------------------------------------------- Visit TechGenix.com for more information about our other sites: http://www.techgenix.com ------------------------------------------------------- To unsubscribe visit http://www.msexchange.org/pages/exchangelist.asp Report abuse to listadmin@xxxxxxxxxxxxxx