RE: NDR with the code 5.0.0

  • From: "Shevill, Mark M SITI-ITDCE22" <Mark.Shevill@xxxxxxxxx>
  • To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
  • Date: Fri, 20 Jun 2003 14:19:35 +0100

Numerical Code: 5.0.0
First Available: All numerical codes that were first available with Exchange 
2000 Service Pack 1 (4.3.2, 5.4.0, 5.4.4, 5.5.0) were initially all classified 
as 5.0.0 prior to Exchange 2000 Service Pack 1.
Possible Cause:
There is no route for the given address space, for example, an SMTP connector 
is configured, but this address does not match.
DNS returned an authoritative host that was not found for the domain.
The routing group does not have a connector defined; mail from one server in 
one routing group does not have a route to another routing group.
An SMTP Protocol error occurred.
Troubleshooting: Correct or add an address space of type SMTP with asterisk (*) 
value to one or more SMTP connectors; verify that DNS is working; make sure 
that routing groups have connectors connecting them. Also, if not on Exchange 
2000 Service Pack 1, apply Service Pack 1 to narrow the issue down. 

Mark Shevill
IMG Messaging Technical Lead
Shell Information Technology International Limited
Rowlandsway, Wythenshawe, Manchester M22 5SB, United Kingdom

Tel: +44 161 435 8709 Fax: +44 161 933 3502 Other Tel: +44 7932 625510
Email: Mark.Shevill@xxxxxxxxx
Internet: http://www.shell.com


-----Original Message-----
From: osman filiz [mailto:osmanfiliz@xxxxxxxxxxx]
Sent: 20 June 2003 14:10
To: [ExchangeList]
Subject: [exchangelist] NDR with the code 5.0.0


http://www.MSExchange.org/

Hi,
We are using e2k sp3 on w2k sp3. Our clients are using outlook 2000. When 
clients want to send e-mail more than 500 reciepents (same mail to 500 
reciepent) which destinated to remote delivery than the mail not delivered. 
It gives the error:
The e-mail system was unable to deliver the message, but did not report a 
specific reason.  Check the address and try again.  If it still fails, 
contact your system administrator.<x.y.z#5.0.0>

In event viewer i take this error messages:
Event Type:     Warning
Event Source:   MSExchangeTransport
Event Category: Queuing Engine
Event ID:       4004
Date:           20.06.2003
Time:           14:38:31
User:           N/A
Computer:       MAIL
Description:
Categorization failed.  The error message is 'The parameter is incorrect.
'.
Data:
0000: 57 00 00 00               W...


Event Type:     Warning
Event Source:   MSExchangeTransport
Event Category: Connection Manager
Event ID:       756
Date:           20.06.2003
Time:           14:38:31
User:           N/A
Computer:       MAIL
Description:
A non-delivery report with a status code of 5.0.0 was generated for 
recipient rfc822;bugrabaskurt@xxxxxxxxx (Message-ID 
<3A7B904BFAE78C4CB61E522E1BC28EF401BAB974@xxxxx>).
Data:
0000: 57 00 07 80               W..&#128;


The problem is not repeated if the client send e-mail to 100-200 
reciepent.Any suggestions.Thanks...

_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE* 
http://join.msn.com/?page=features/virus


------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Other Internet Software Marketing Sites:
Leading Network Software Directory: http://www.serverfiles.com
No.1 ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/
Network Security Library: http://www.secinf.net/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as: 
Mark.Shevill@xxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')


Other related posts: