[ExchangeList] Re: How to override size limits for one user

  • From: "Periyasamy, Raj" <Raj.Periyasamy@xxxxxxxxxxxx>
  • To: <exchangelist@xxxxxxxxxxxxx>
  • Date: Tue, 6 Nov 2007 09:25:55 -0500

I assume you applied the higher limits under Delivery Restrictions for the 
user. 
Have you checked your SMTP VS properties to see if any limits are defined there?

Now, even if you get all these limits set, and the user sends the email out, 
Its very doubtful the receiving destination servers will accept a large message 
with close to 100MB attachment. It's not at all a good practice to send such 
large attachments in email. The maximum, is 10 - 12MB to keep things under 
control. Why don't you use some other means like an FTP server?

 

Regards,

Raj P

> This note and any attachments may contain Infineum confidential information. 
> If you are an unintended recipient: (i) place no reliance on the information 
> contained herein; (ii) do not disclose, distribute, or duplicate any 
> information from this note; and (iii) please contact the sender.
> 
> 
> 
> 
> _____________________________________________ 
> From:         exchangelist-bounce@xxxxxxxxxxxxx 
> [mailto:exchangelist-bounce@xxxxxxxxxxxxx]  On Behalf Of John L. Gitzen II
> Sent: Monday, November 05, 2007 2:09 PM
> To:   exchangelist@xxxxxxxxxxxxx
> Subject:      [ExchangeList] How to override size limits for one user
> 
> I have a user in my organization that needs to send a very large email but I 
> can> '> t seem to get it to work.  System global setting is 10MB, and I 
> bumped the User mailbox setting to 150MB.  The mail with attachments is 94MB. 
>  SMTP Connector Message Size Limit under Routing Groups is not set, values 
> are greyed.  SMTP Virtual server Setttings under Servers/Protocol/SMTP 
> Virtual Server/Messages is also not set.  Yet whenever the message is sent we 
> get - Task 'Microsoft Exchange Server - Sending' reported error (0x80040610) 
> : 'The message being sent exceeds the message size established for this user.'
> 
> What am I missing, I thought the Limit set at the user level would override 
> the System global settings, etc?
> John  
> Technology Applied 
> 
> 

Other related posts: