RE: Exchange 2k Server as Domain Controller

  • From: "Jason Juillerat" <jasonj@xxxxxxxxxxx>
  • To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
  • Date: Fri, 8 Nov 2002 09:35:08 -0800

Do you have secure IIS or some other type of IIS security program installed on 
the machine you are receiving the 80004005 error on?
J

-----Original Message-----
From: Shevill, Mark M SITI-ITDSEC44 [mailto:Mark.Shevill@xxxxxxxxx]
Sent: Friday, November 08, 2002 1:23 AM
To: [ExchangeList]
Subject: [exchangelist] RE: Exchange 2k Server as Domain Controller


http://www.MSExchange.org/

Dear all 
E2K SP3 concentrates heavily on security, as such there are complications
when installing. A major factor is that the server accesses the metabase
with anonymous access and the SMTP VS accesses it with Basic authentication.
SP3 denies access for the transfer of information as a result of this. Mail
cannot be transferred between routing groups due to this implementation. If
you have SRS installed, this should also by updated with extreme caution. I
would stongly suggest that you install on a test environment first.
Strangely enough upgrading a ADC server with SP3 has no implications (that
we have found) and as a result went smoothly. 


Mark Shevill
IMG Messaging Deputy Team Leader
Shell Information Technology International Limited
Rowlandsway, Wythenshawe, Manchester M22 5SB, United Kingdom

Tel: +44 161 935 7152
Email: Mark.M.Shevill@xxxxxxxxxxxx
Internet: http://www.shell.com


-----Original Message-----
From: Chris McNally [mailto:cmcnally@xxxxxxxxxxxxxxxxxxx]
Sent: 07 November 2002 22:40
To: [ExchangeList]
Subject: [exchangelist] RE: Exchange 2k Server as Domain Controller


http://www.MSExchange.org/

800004005 Error Message

It is a general error telling you the data you want cannot be accessed for
some reason. Usually you'll get a moderately helpful explanation along with
the 80004005 notification. In most cases, it comes down to lack of
permission or DSN naming problems. 

However, note that you can get this for other reasons as well, including the
wrong type of parameter sent to a SQL Stored Procedure. The error is
actually bubbled up from the data provider, so sometimes it can be hard to
tell exactly what happened or where.


-----Original Message-----
From: Whitaker, Matthew [mailto:Matthew.Whitaker@xxxxxxxx]
Sent: Thursday, November 07, 2002 1:56 PM
To: [ExchangeList]
Subject: [exchangelist] RE: Exchange 2k Server as Domain Controller


http://www.MSExchange.org/

I agree is SHOULD let me but it gives me a 80004005 error everytime I
try and there is nothing listed in the knowledge base concerning this
error while trying to change the config server.

-----Original Message-----
From: Scott Van Singel [mailto:svansingel@xxxxxxxxxxxxxxxxx] 
Sent: Thursday, November 07, 2002 2:52 PM
To: [ExchangeList]
Subject: [exchangelist] RE: Exchange 2k Server as Domain Controller


http://www.MSExchange.org/

yes, you can set excange to use the local DC for Config, DC, and GC. 


-----Original Message-----
From: Whitaker, Matthew [mailto:Matthew.Whitaker@xxxxxxxx]
Sent: Thursday, November 07, 2002 4:20 PM
To: [ExchangeList]
Subject: [exchangelist] RE: Exchange 2k Server as Domain Controller


http://www.MSExchange.org/

That's what I am running now 

In the Directory access tap in the Server properties in system manager
the only server listed as "config" is my DC across country.  It is not
listing my GC server as "config" which is right above it in the rack.  

Confused?  I am!



-----Original Message-----
From: Linda Wilson [mailto:lwilson@xxxxxxxxxxx] 
Sent: Thursday, November 07, 2002 2:11 PM
To: [ExchangeList]
Subject: [exchangelist] RE: Exchange 2k Server as Domain Controller


http://www.MSExchange.org/

Has anyone out there installed Service Pak 3 for Exchange 2000?

-----Original Message-----
From: Scott Van Singel [mailto:svansingel@xxxxxxxxxxxxxxxxx]
Sent: Thursday, November 07, 2002 12:56 PM
To: [ExchangeList]
Subject: [exchangelist] RE: Exchange 2k Server as Domain Controller


http://www.MSExchange.org/

Matt, 
 If you have a extra server make it a DC, then in Exchange 2000 (if you
put Service Pack 2 on it) you can tell what server it should get all the
information from. 
In Exchange system manger open fist store group, then rt click on the
server name, go to properties, then click on Directory access. Here you
can set what server Exchange will query for information. 
This can be the new server and the data will be local, this should speed
up your performance. 



-----Original Message-----
From: Whitaker, Matthew [mailto:Matthew.Whitaker@xxxxxxxx]
Sent: Thursday, November 07, 2002 1:08 PM
To: [ExchangeList]
Subject: [exchangelist] Exchange 2k Server as Domain Controller


http://www.MSExchange.org/


Let me clarify something.  I already have a GC server.  I also have a
remote DC server that is connected via FR from NJ (I am in AZ).  For
some reason my Exchange server sees the GC server but will not allow me
to select it for as the Enterprise Config Server under Recipient Update
Service.

I have a 4 way P3 800 server with 2Gb memory and four 36.4Gb hard-drives
on a Raid5 with only 280 mailboxes yet my Exchange/Outlook is EXTREMELY
slow!!!!!!!  My RPC Operations/SEC are spiking and I can not find a way
to resolve the performace issue.  After watching the network monitor for
awhile I kept seeing it wanting to communicate with the only DC that is
across country.  I was hoping that making it just a simple DC without
any FSMO roles the AL performance will increase. 

Thoughts.

Has anyone else had performace issues like this??  One hell of a box
with poor performace?
*** Confidential ***
The information in this email is confidential and may be proprietary or
legally privileged. It is intended solely for the addressee. Access to
this email by anyone else is unauthorized. If you are not the intended
recipient, please reply to the sender that you received the message in
error and then delete or destroy the message along with any attachments.
Thank you.



------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/ Windows
2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
svansingel@xxxxxxxxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')



------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/ Windows
2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
lwilson@xxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')

------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/ Windows
2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
matthew.whitaker@xxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')







*** Confidential ***
The information in this email is confidential and may be proprietary or
legally privileged. It is intended solely for the addressee. Access to
this email by anyone else is unauthorized. If you are not the intended
recipient, please reply to the sender that you received the message in
error and then delete or destroy the message along with any attachments.
Thank you.



------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/ Windows
2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
svansingel@xxxxxxxxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')



------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/ Windows
2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
matthew.whitaker@xxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')







*** Confidential ***
The information in this email is confidential and may be proprietary or
legally privileged. It is intended solely for the addressee. Access to this
email by anyone else is unauthorized. If you are not the intended recipient,
please reply to the sender that you received the message in error and then
delete or destroy the message along with any attachments. Thank you.



------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
cmcnally@xxxxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')

------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
Mark.Shevill@xxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')

------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as: 
jasonj@xxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')


Other related posts: