RE: Exchange 2k Server as Domain Controller

  • From: "Linda Wilson" <lwilson@xxxxxxxxxxx>
  • To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
  • Date: Thu, 7 Nov 2002 14:00:58 -0800

Thank you for the information... do you have more than one Exchange server?  I 
am wondering if there is any affect on the RGB connectors set between ours... 
especially since we will have to stage the service pack installation..



-----Original Message-----
From: Whitaker, Matthew [mailto:Matthew.Whitaker@xxxxxxxx]
Sent: Thursday, November 07, 2002 1:55 PM
To: [ExchangeList]
Subject: [exchangelist] RE: Exchange 2k Server as Domain Controller


http://www.MSExchange.org/

My Exchange performance is very slow but this was the case before the
SP3 install.  The post sp3 fixed the DCOM errors I got after SP3 was
installed.  OWA seems faster but everything else remains the same.

-----Original Message-----
From: Linda Wilson [mailto:lwilson@xxxxxxxxxxx] 
Sent: Thursday, November 07, 2002 2:46 PM
To: [ExchangeList]
Subject: [exchangelist] RE: Exchange 2k Server as Domain Controller


http://www.MSExchange.org/

So to make sure I have this clearly... Exchange SP3 gets installed
followed by a fix..  when the fix was installed, did the Exchange Server
behave?  or are you having other problems?

Thanks,

-----Original Message-----
From: Whitaker, Matthew [mailto:Matthew.Whitaker@xxxxxxxx]
Sent: Thursday, November 07, 2002 1:22 PM
To: [ExchangeList]
Subject: [exchangelist] RE: Exchange 2k Server as Domain Controller


http://www.MSExchange.org/

There is a post sp3 fix for exchange:

q329882_enu_i386.exe

-----Original Message-----
From: Linda Wilson [mailto:lwilson@xxxxxxxxxxx] 
Sent: Thursday, November 07, 2002 2:19 PM
To: [ExchangeList]
Subject: [exchangelist] RE: Exchange 2k Server as Domain Controller


http://www.MSExchange.org/

Thank you... now, did you experieince any problems with the process? the
reason I ask is they are skeptical here about doing it.. however, we
have 4 Exchange 2000 servers and when W2KSP3 was installed the Exchange
Servers have been erroring in weird ways...

Fill me in, if you would please..

Thanks,
Linda

-----Original Message-----
From: Stephen Hartley [mailto:shartley@xxxxxxxxxxxxxxxxx]
Sent: Thursday, November 07, 2002 1:18 PM
To: [ExchangeList]
Subject: [exchangelist] RE: Exchange 2k Server as Domain Controller


http://www.MSExchange.org/

Yes

-----Original Message-----
From: Linda Wilson [mailto:lwilson@xxxxxxxxxxx] 
Sent: Friday, November 08, 2002 7:11 AM
To: [ExchangeList]
Subject: [exchangelist] RE: Exchange 2k Server as Domain Controller

http://www.MSExchange.org/

Has anyone out there installed Service Pak 3 for Exchange 2000?

-----Original Message-----
From: Scott Van Singel [mailto:svansingel@xxxxxxxxxxxxxxxxx]
Sent: Thursday, November 07, 2002 12:56 PM
To: [ExchangeList]
Subject: [exchangelist] RE: Exchange 2k Server as Domain Controller


http://www.MSExchange.org/

Matt, 
 If you have a extra server make it a DC, then in Exchange 2000 (if you
put Service Pack 2 on it) you can tell what server it should get all the
information from. 
In Exchange system manger open fist store group, then rt click on the
server name, go to properties, then click on Directory access. Here you
can set what server Exchange will query for information. 
This can be the new server and the data will be local, this should speed
up your performance. 



-----Original Message-----
From: Whitaker, Matthew [mailto:Matthew.Whitaker@xxxxxxxx]
Sent: Thursday, November 07, 2002 1:08 PM
To: [ExchangeList]
Subject: [exchangelist] Exchange 2k Server as Domain Controller


http://www.MSExchange.org/


Let me clarify something.  I already have a GC server.  I also have a
remote DC server that is connected via FR from NJ (I am in AZ).  For
some reason my Exchange server sees the GC server but will not allow me
to select it for as the Enterprise Config Server under Recipient Update
Service.

I have a 4 way P3 800 server with 2Gb memory and four 36.4Gb hard-drives
on a Raid5 with only 280 mailboxes yet my Exchange/Outlook is EXTREMELY
slow!!!!!!!  My RPC Operations/SEC are spiking and I can not find a way
to resolve the performace issue.  After watching the network monitor for
awhile I kept seeing it wanting to communicate with the only DC that is
across country.  I was hoping that making it just a simple DC without
any FSMO roles the AL performance will increase. 

Thoughts.

Has anyone else had performace issues like this??  One hell of a box
with poor performace?
*** Confidential ***
The information in this email is confidential and may be proprietary or
legally privileged. It is intended solely for the addressee. Access to
this email by anyone else is unauthorized. If you are not the intended
recipient, please reply to the sender that you received the message in
error and then delete or destroy the message along with any attachments.
Thank you.



------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/ Windows
2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
svansingel@xxxxxxxxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')



------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/ Windows
2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
lwilson@xxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')

------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/ Windows
2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
exchlist@xxxxxxxxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')


------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/ Windows
2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
lwilson@xxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')

------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/ Windows
2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
matthew.whitaker@xxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')







*** Confidential ***
The information in this email is confidential and may be proprietary or
legally privileged. It is intended solely for the addressee. Access to
this email by anyone else is unauthorized. If you are not the intended
recipient, please reply to the sender that you received the message in
error and then delete or destroy the message along with any attachments.
Thank you.



------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/ Windows
2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
lwilson@xxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')

------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/ Windows
2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
matthew.whitaker@xxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')







*** Confidential ***
The information in this email is confidential and may be proprietary or legally 
privileged. It is intended solely for the addressee. Access to this email by 
anyone else is unauthorized. If you are not the intended recipient, please 
reply to the sender that you received the message in error and then delete or 
destroy the message along with any attachments. Thank you.



------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as: 
lwilson@xxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')


Other related posts: