[ExchangeList] Re: Exchange 2007 IS Store Does not Fail over when NIC 100Full

Glad to hear James. Hope the backup times dwindle a bit for you.

 

From: exchangelist-bounce@xxxxxxxxxxxxx
[mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of James Chong
Sent: Wednesday, November 28, 2007 11:38 AM
To: exchangelist@xxxxxxxxxxxxx
Subject: [ExchangeList] Re: Exchange 2007 IS Store Does not Fail over
when NIC 100Full

 

Set it to 1GB Full Auto and the IS Resource comes online; must be one of
the oddities; SA comes online but not the IS when on 100full. Hopefully
this resolve our slow backup issue!

 

 

James Chong
Sr. Systems Engineer
InPhonic, Inc.

11130 Sunrise Valley Dr.

Reston, VA 20191
O (703) 657-4612
C (703) 863-1483 

________________________________

From: exchangelist-bounce@xxxxxxxxxxxxx
[exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of James Chong
Sent: Tuesday, November 27, 2007 4:02 PM
To: exchangelist@xxxxxxxxxxxxx
Subject: [ExchangeList] Re: Exchange 2007 IS Store Does not Fail over
when NIC 100Full

Yes I set both to 100full; neither one does not want to start the IS
resource, but once I set it to auto comes right back up.

 

 

James

 

From: exchangelist-bounce@xxxxxxxxxxxxx
[mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of Wright, Steve
Sent: Tuesday, November 27, 2007 3:55 PM
To: exchangelist@xxxxxxxxxxxxx
Subject: [ExchangeList] Re: Exchange 2007 IS Store Does not Fail over
when NIC 100Full

 

Also, if you want to have the nic at 100/Full why don't you try setting
the switch port to 100/full and leaving the Nic setting on Auto?

Have you tried that yet?

 

From: exchangelist-bounce@xxxxxxxxxxxxx
[mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of James Chong
Sent: Tuesday, November 27, 2007 2:04 PM
To: exchangelist@xxxxxxxxxxxxx
Subject: [ExchangeList] Exchange 2007 IS Store Does not Fail over when
NIC 100Full

 

Anybody have any ideas as to why my cluster does not want to start the
IS Stores when the NIC is set to 100Full? Tried today; doesn't want to
start; all basic resources start cluster name; IP; NIC etc. System
Attendant starts but not IS. Once I change back to Auto starts right up.

 

Thanks

 

James Chong
Sr. Systems Engineer
InPhonic, Inc.

11130 Sunrise Valley Dr.

Reston, VA 20191
O (703) 657-4612
C (703) 863-1483

Other related posts: