Set it to 1GB Full Auto and the IS Resource comes online; must be one of the oddities; SA comes online but not the IS when on 100full. Hopefully this resolve our slow backup issue!
James Chong
Sr. Systems Engineer InPhonic, Inc. 11130 Sunrise Valley Dr.
Reston, VA 20191
O (703) 657-4612 C (703) 863-1483 From: exchangelist-bounce@xxxxxxxxxxxxx [exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of James Chong Sent: Tuesday, November 27, 2007 4:02 PM To: exchangelist@xxxxxxxxxxxxx Subject: [ExchangeList] Re: Exchange 2007 IS Store Does not Fail over when NIC 100Full Yes I set both to 100full; neither one does not want to start the IS resource, but once I set it to auto comes right back up.
James
From: exchangelist-bounce@xxxxxxxxxxxxx [mailto:exchangelist-bounce@xxxxxxxxxxxxx]
On Behalf Of Wright, Steve
Also, if you want to have the nic at 100/Full why don’t you try setting the switch port to 100/full and leaving the Nic setting on Auto? Have you tried that yet?
From: exchangelist-bounce@xxxxxxxxxxxxx [mailto:exchangelist-bounce@xxxxxxxxxxxxx]
On Behalf Of James Chong
Anybody have any ideas as to why my cluster does not want to start the IS Stores when the NIC is set to 100Full? Tried today; doesn’t want to start; all basic resources start cluster name; IP; NIC etc. System Attendant starts but not IS. Once I change back to Auto starts right up.
Thanks
James Chong 11130 Sunrise Valley Dr. Reston, VA 20191
|