Re: Exchange 2000 cluster
- From: "Mark Puchalski" <Mark.Puchalski@xxxxxxxxxxxx>
- To: <exchangelist@xxxxxxxxxxxxx>
- Date: Sun, 08 Jun 2003 10:38:39 -0400
We're getting ready to go to production with (2) Dell PowerEdge 2650
servers in an Active/Active cluster in front of a Dell/EMC CX600 SAN.
So far in our lab, it's been great.
--------------------------------------------------------------
Mark A. Puchalski
Network Engineer
Honigman Miller Schwartz and Cohn LLP
Office: 313.465.7167
Fax: 313.465.8267
>>> jibarra@xxxxxxxxxxx 5/27/03 5:39:00 PM >>>
http://www.MSExchange.org/
Hi, we are thinking on upgrading Exchange 5.5 to Exchange 2000 within
the next few months.
Right now we have a offline, hotspare configuration. Meaning that if
our primary server fails, we bring the other on online and just copy the
logs over, after doing a daily restore that is.
I am looking into the possibility of creating a cluster environment
instead, with new HW. I am sure many of you have this at your shops.
Basically, what I'd lie to do is have two servers attached to an
external raid array. Can you please give me some pointer as to what HW
you guys recommend or use. We currently use mostly Dell Power Edge
servers here.
Thanks in advance.
Juan ------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Other Internet Software Marketing Sites:
Leading Network Software Directory: http://www.serverfiles.com
No.1 ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/
Network Security Library: http://www.secinf.net/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
Mark.Puchalski@xxxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
*********************************************************************
Confidential: This electronic message and all contents
contain information from the law firm of Honigman Miller
Schwartz and Cohn LLP which may be privileged,
confidential or otherwise protected from disclosure.
The information is intended to be for the addressee
only. If you are not the addressee, any disclosure, copy,
distribution or use of the contents of this message is
prohibited. If you have received this electronic message
in error, please notify us immediately (313.465.7000)
and destroy the original message and all copies.
*********************************************************************
Other related posts:
