RE: Errors after removing last 5.5 server

  • From: "Rob Freeman" <sysadmin@xxxxxxxxxxxx>
  • To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
  • Date: Tue, 6 May 2003 16:55:11 -0500

I can "fake" it , but mine was a real ip address with the server name, which
is now turned off.  I run internal DNS for my AD servers.  I might check
though and see if an entry is still listed in there.
----- Original Message -----
From: "James Hanna" <jhanna@xxxxxxxxxxxxxx>
To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
Sent: Tuesday, May 06, 2003 4:01 PM
Subject: [exchangelist] RE: Errors after removing last 5.5 server


> http://www.MSExchange.org/
>
> Rob,
> I ran into this exact same problem today.  I did a migration over the
> weekend to a new server and was seeing those types of errors on both
> servers.
> It ended up being a DNS issue (and since I don't have an internal DNS
server
> I did it the crude way).  First go to each server and look for that
specific
> error.  You'll see something like:
>
> An interface error has occurred. An MtaBindBack over RPC has failed.
> Locality Table (LTAB) index: 166, NT/MTA error code: 1722. Comms error
> 1722, Bind error 0, Remote Server Name NEWMAN, Protocol String
> ncacn_ip_tcp:NEWMAN.domain.com[1045] [BASE IL INCOMING RPC 40 507] (14)
>
> So from that server try to ping the exact string, in this case it is
> "NEWMAN.domain.com"
>
> Due to no internal DNS it was not resolving, so I added an entry on the
host
> file of that server referencing newman.domain.com with the associated IP.
> Then the ping worked successfully and I have not received a message like
> that on EITHER server since 1PM MST...its now more than 2 hours later and
> still nothing, when before they were coming up every 10 minutes.
> Hope that helps!
> James
>
>
>
> -----Original Message-----
> From: Rob Freeman [mailto:sysadmin@xxxxxxxxxxxx]
> Sent: Tuesday, May 06, 2003 12:49 PM
> To: [ExchangeList]
> Subject: [exchangelist] Errors after removing last 5.5 server
>
> http://www.MSExchange.org/
>
> We removed our last exchange 5.5 server this weekend.  Since then, I am
> noticing tons of events on my windows 2000 exchange server running sp3 for

> both.  They are:
>
> An RPC communications error occurred. Unable to bind over RPC. Locality
> Table (LTAB) index: 143, Windows 2000/MTA error code: 1722. Comms error
> 1722, Bind error 0, Remote Server Name server_name [MAIN BASE 1 500 %10]
> (14)
>
> I tried to google it and look at microsoft, but I did not see anything
that
> looked exactly like the error above.  What could be causing this message
and
> how may I stop it?
>
> Thanks
>
> Rob Freeman
> Fleetone
>
>
> ------------------------------------------------------
> List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
> Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
> Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
> ------------------------------------------------------
> ISA Server Resource Site: http://www.isaserver.org
> Windows Security Resource Site: http://www.windowsecurity.com/
> Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
> ------------------------------------------------------
> You are currently subscribed to this MSExchange.org Discussion List as:
> jhanna@xxxxxxxxxxxxxx
> To unsubscribe send a blank email to
> $subst('Email.Unsub')
>
> ------------------------------------------------------
> List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
> Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
> Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
> ------------------------------------------------------
> ISA Server Resource Site: http://www.isaserver.org
> Windows Security Resource Site: http://www.windowsecurity.com/
> Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
> ------------------------------------------------------
> You are currently subscribed to this MSExchange.org Discussion List as:
sysadmin@xxxxxxxxxxxx
> To unsubscribe send a blank email to
$subst('Email.Unsub')



Other related posts: