RE: Error while installing Exchange 2000 in Ex c hange 5.5 Site(0xC103C93(64659)

  • From: mathif@xxxxxxxxxxxxxxx
  • To: exchangelist@xxxxxxxxxxxxx
  • Date: Tue, 22 Jun 2004 16:12:27 +0300

Michael,
Thanks for the article, but if i understand that correctly, that has to be
done if we are doing an inplace upgrade rit?
Here i am trying to join a new E2k acting as Additional Domain controller in
Exchange 5.5 site..
 
ICan any one suggest me a document or steps to join a new Exchange 2000
Server in Exchange 5.5 Site??
Any ideas...any suggestions.
 
Thanks agian,
Athif

-----Original Message-----
From: Michael B. Smith [mailto:michael@xxxxxxxxxx] 
Sent: Monday, June 21, 2004 8:18 PM
To: [ExchangeList]
Subject: [exchangelist] RE: Error while installing Exchange 2000 in Ex c
hange 5.5 Site(0xC103F C93(64659)


http://www.MSExchange.org/

This article tells you how to set it to 390 - but you want it on 389. :-P
 
http://support.microsoft.com/default.aspx?scid=kb;en-us;312501
<http://support.microsoft.com/default.aspx?scid=kb;en-us;312501&Product=ech>
&Product=ech

   _____  

From: mathif@xxxxxxxxxxxxxxx [mailto:mathif@xxxxxxxxxxxxxxx] 
Sent: Monday, June 21, 2004 12:19 PM
To: [ExchangeList]
Subject: [exchangelist] RE: Error while installing Exchange 2000 in Ex
change 5.5 Site(0xC103F C93(64659)


http://www.MSExchange.org/

Michael,
Thanks for the reply.
How will i make sure if the Exchange 5.5 is listening on port 389, is that
thru NETSTAT? How do i see if LDAP is turned on for Exchange 5.5? How do i
turn LDAP on for Exchange 5.5?
Can anyone suggest me.
Thanks for your time.
Athif

-----Original Message-----
From: Michael B. Smith [mailto:michael@xxxxxxxxxx] 
Sent: Monday, June 21, 2004 6:30 PM
To: [ExchangeList]
Subject: [exchangelist] RE: Error while installing Exchange 2000 in Exchange
5.5 Site(0xC103F C93(64659)


http://www.MSExchange.org/

I've run into this at least a dozen times. The four items below generally
take care of it.
 
Quick-n-dirty on the new Exchange 2000 server: 
 
1) put SERVERNAME as a #PRE in LMHOSTS
2) put SERVERNAME in HOSTS
3) Use Administrator to do the install
 
And a quick-n-dirty for the Exchange 5.5 server:
 
4) Make sure that Exchange55 is listening on port 389 and LDAP is turned on
for Exchange 55

   _____  

From: mathif@xxxxxxxxxxxxxxx [mailto:mathif@xxxxxxxxxxxxxxx] 
Sent: Monday, June 21, 2004 11:21 AM
To: [ExchangeList]
Subject: [exchangelist] Error while installing Exchange 2000 in Exchange 5.5
Site(0xC103F C93(64659)


http://www.MSExchange.org/

Hello Folks,
I am getting a strange error while trying to install Exchange 2000 Server in
Exchange 5.5 Site. While running FORESTPREP the wizard prompted to enter
Exchange 5.5 Server name, and when i try to give that, it popsup with error
"Setup encountered error while attempting to bind the Exchange Server
"Servername:0xC103FC93(64659): could not bind to the Microsoft Exchange
Directory Server,SERVERNAME. The Microsoft Exchange Server computer doesnot
respond"
 
I am really stumped. Actually, i am trying to migrate from Exchange 5.5 to
Exchange 2000. I have completed upgrading WINDOWS NT 4 PDC to 2000 Domain
controller thru In Place Upgrade Method and everything went fine.. Now i am
trying to migrate from Exchange 5.5 to Exchange 2000 thru Move Mail box
method. I am following these documents;
 
316886 - HOW TO Migrate from Exchange Server 5.5 to Exchange 2000 Server
http://support.microsoft.com/default.aspx?scid=kb;EN-US;316886
<http://support.microsoft.com/default.aspx?scid=kb;EN-US;316886> 
 
296260 - XGEN How to Configure a Two-Way Recipient Connection Agreement for
Exchange Server 5.5 Users
http://support.microsoft.com/default.aspx?scid=kb;EN-US;296260
<http://support.microsoft.com/default.aspx?scid=kb;EN-US;296260> 
 
274173 - XADM Documentation for the NTDSNoMatch Utility
http://support.microsoft.com/default.aspx?scid=kb;EN-US;274173
<http://support.microsoft.com/default.aspx?scid=kb;EN-US;274173> 
 
256862 - XADM How to Correct Mismatched Accounts After Active Directory
Connector Replication
http://support.microsoft.com/default.aspx?scid=kb;EN-US;256862
<http://support.microsoft.com/default.aspx?scid=kb;EN-US;256862> 
 
284148 - XADM How to Remove the Last Exchange Server 5.5 Computer from an
Exchange 2000 Administrative Group
http://support.microsoft.com/default.aspx?scid=kb;EN-US;284148
<http://support.microsoft.com/default.aspx?scid=kb;EN-US;284148> 
 
152959 - XADM How to Remove the First Exchange Server in a Site
http://support.microsoft.com/default.aspx?scid=kb;EN-US;152959
<http://support.microsoft.com/default.aspx?scid=kb;EN-US;152959> 
 
Any ideas?
Thanks for your time.
Athif



  ----------------------------------------------------- 
 This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom/which they are
addressed. If you have received this email in error please notify the system
manager at the following email address: sadmin@xxxxxxxxxxxxxxx
<mailto:sadmin@xxxxxxxxxxxxxxx>. Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of Al Faisaliah Group. Internet communications
cannot be guaranteed to be secure or error-free as information could be
intercepted, corrupted, lost, arrive late or contain viruses. The sender
therefore does not accept liability for any errors or omissions in the
context of this message, which arise as a result of Internet transmission.
Finally, the recipient should check this email and any attachments for the
presence of viruses. Al Faisaliah Group accepts no liability for any damage
caused by any virus transmitted by this email. 
  ----------------------------------------------------- 
 

Other related posts: