RE: ESEUTIL

  • From: "Taylor, George" <gtaylor@xxxxxxxx>
  • To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
  • Date: Wed, 22 Feb 2006 08:18:07 -0700

Theres no problem with that, use either method.  I normally move the
.edb and .stm from the SAN to a fast local RAID 1 and do the defrag
there.  Make sure you use the /p parameter to preserve your original
datastore.

George Taylor
Systems Programmer
Regional Health Inc.
 

-----Original Message-----
From: Wright, Steve [mailto:SteveW@xxxxxxxxxxxxxxx] 
Sent: Wednesday, February 22, 2006 7:54 AM
To: [ExchangeList]
Subject: [exchangelist] ESEUTIL

http://www.MSExchange.org/


My data drive on the server has only 2.12gb free. I have 3 mail stores.
1 and 2 are approximately 70GB and store 3 is about 12gb. I need to run
eseutil during offline to defrag and truncate the db's. Since I don't
have the free space to do this can I take the store offline, move the
edb and stm pair to another location and run eseutil against them there?
Or am I forced to use the /t switch with eseutil?

Thanks, 

R. Steve Wright

------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
------------------------------------------------------
Visit TechGenix.com for more information about our other sites:
http://www.techgenix.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
gtaylor@xxxxxxxx To unsubscribe visit
http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Report abuse to info@xxxxxxxxxxxxxx



Other related posts: