[ExchangeList] Re: DSAccess Topology Discovery Fails.

  • From: "Mahadevan Subramanian" <devan.scorp@xxxxxxxxx>
  • To: exchangelist@xxxxxxxxxxxxx
  • Date: Thu, 3 Jan 2008 21:50:32 +0530

Hello Prabhu,
This is a client environment. We can not change the configurations and moreover it is always recomended to keep the DSAccess in auto discovery mode. And i do not think changing the entries manually using ESM or hardcoding the entries manually in registries will help in this case.

On 1/3/08, Kamuni, Prabhakar <Prabhakar.Kamuni@xxxxxxxxxxxxx> wrote:

Hi Maha,


Can you try some thing here?


In the Directory Access tab of the FE server object in System Manager, Can you set the server to manually and put the correct GC/DC server it can access.






    Thanks and Regards


PRABHAKAR KAMUNI  |  Architecture & Technology  | BETT | System Analyst   

Unisys Global Services -India | 135/1 Residency Road   |  Bangalore  |  India |Business  Phone  91 80 4159 4828 | Internal  7594828 & 7594200  |Business  Mobile +91 9945154544


From: exchangelist-bounce@xxxxxxxxxxxxx [mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of Mahadevan Subramanian
Sent: Thursday, January 03, 2008 9:35 PM

To: exchangelist@xxxxxxxxxxxxx
Subject: [ExchangeList] Re: DSAccess Topology Discovery Fails.



Hello James,


Yeah i checked the 2080 events... As the normal topology discovery happens every 15 min, this 2080 event should also be listed every 15 min. But once the problem is started this event does not occur since the DS bind itself fails with all DCs. Instead the several list of events which i have mentioned in my previous mail gets populated. But the last topology discovery before the problem starts (ie: before 15 min) will be succesfull and we will get a 2080 event with normal values for CDG.





On 1/3/08, James Chong < jchong@xxxxxxxxxxxxxx> wrote:

I have seen problems with discovery failures due to SACL issues; but this would be an all or nothing deal ie. It would work or wouldn't. Your issue is strange since it works on an off. Is there an event id 2080. If so; can you see what values you get for reachability and SACL and post?


Event Type: Information Event Source: MSExchangeDSAccess Event Category: Topology Event ID: 2080


Event ID 2080 from MSExchangeDSAccess



James Chong
Sr. Systems Engineer
InPhonic, Inc.

11130 Sunrise Valley Dr.

Reston, VA 20191
O (703) 657-4612
C (703) 863-1483


From: exchangelist-bounce@xxxxxxxxxxxxx [mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of Mahadevan Subramanian
Sent: Thursday, January 03, 2008 9:48 AM
To: exchangelist@xxxxxxxxxxxxx
Subject: [ExchangeList] Re: DSAccess Topology Discovery Fails.


Hello Michael,


The access to the port is not actually gone. We are able to telnet the DS servers in 389 port from the affected Exchange Server during the problem. But rest of the tools like DCdiag, Netdiag.... etc is not running during the time when the problem persists. Only thing is the Topology Discovery fails to bind with any of the DS serevrs. We have got multiple DCs which are detected in-site, once this problem happens it is trying to get the Topology information using some boot strap server and DS bind fails with all DCs and hence going to Out-Site DC and even that is getting failed.


This does not look like a AD issue as other Exchange Servers in the site are also using the same DCs in the DSAccess Auto Discovery mode.


Any suggestions for throwing light in this dark issue is appreciated... :-)





On 1/2/08, Michael B. Smith < michael@xxxxxxxxxxxxxxxxxxxxxxxx> wrote:

Can you "telnet <ds-server> 389" ?? That is, is access to the port actually gone?


If so, this isn't an Exchange issue per se – the Exchange problem is just a symptom of a larger problem.




Michael B. Smith

MCSE/Exchange MVP



From: exchangelist-bounce@xxxxxxxxxxxxx [mailto:exchangelist-bounce@xxxxxxxxxxxxx] On Behalf Of Mahadevan Subramanian
Sent: Wednesday, January 02, 2008 11:00 AM
To: exchangelist@xxxxxxxxxxxxx
Subject: [ExchangeList] DSAccess Topology Discovery Fails.



Hello All,


Windows 2003 AD With Native Mode

Exchange 2003 SP2 with Native Mode


We have vague issue in DSAccess Topology discovry only in one particular Front End Exchange server which we use it as Mobility Server.Every week the topology discovery will fail with 2110, 2115, 2114, 2095, 2102, 2103...... events. The main error is " Process MAD.EXE (PID=1908). Could not bind to DS server XXXXXXXX  Error 5a in Port 389". There is no use in running any tests like netdiag, nltest, policy test during this time because it is not able to communicate with port 389. The only temporary slution which we have is Reboot the Exchange server after which it will work fine for another week.


Did the following things..


Increased Diagnostic Logging for DSAccess and hence got the above mentioned events...

Ran ExBPA and found nothing fishy, except 3GB switch enabled in the Front End Server which is not there in any other FE servers.

Memory usage is normal.


We are planning to take this up with Microsoft but before that just thought of getting any of your suggestions if any one has faced this issue.

Regards... Mahadevan


Regards... Maha

Regards... Maha

Regards... Maha

Other related posts: