[ExchangeList] Change private IP on a cluster
- From: "Jose Medeiros" <josemedeiros@xxxxxxxxxxx>
- To: <ActiveDir@xxxxxxxxxxxxxxxxxx>, <exchangelist@xxxxxxxxxxxxx>
- Date: Sun, 4 Jun 2006 22:29:01 -0700
http://www.msexchange.org
-------------------------------------------------------Hi Mike,
Looks like you are going to also have dependencies on Wins and with the
MSDTC:
Exchange Server 2003 and Exchange 2000 Server require NetBIOS name
resolution for full functionality
http://support.microsoft.com/default.aspx?scid=kb;en-us;837391
How to configure Microsoft Distributed Transaction Coordinator on a Windows
Server 2003 cluster
http://support.microsoft.com/default.aspx?scid=kb;en-us;301600
Regards,
Jose :-)
--------------------------------------------------------------------
----- Original Message -----
From: Jose Medeiros
To: ActiveDir@xxxxxxxxxxxxxxxxxx ; exchangelist@xxxxxxxxxxxxx
Cc: mike.newell@xxxxxxxxxxxx
Sent: Sunday, June 04, 2006 9:53 PM
Subject: Re: [ActiveDir] Change private IP on a cluster
Hi Mike,
I've only had to change a SQL 2000 Active / Active Cluster IP and it
involves some additional steps for SQL Virtual Names. It's been over 5 years
since I built an Exchange 2000 cluster, but I do not recall if Exchange has
any dependencies (I would probably post this to the Exchange list and I am
cc'ing them as well)
Take a look at :
Exchange Server 2003 Cluster Configuration Checklist
http://www.microsoft.com/technet/itsolutions/msit/operations/exchclustercklist.mspx?pf=true
Changing the IP address of network adapters in cluster server
http://support.microsoft.com/kb/230356/EN-US/
Or in PDF format at:
http://www.maned.com/support/knowledge_base/Roundhouse/Recommended_Reading/Q230356.pdf
Also just in case you ever have to change it on a SQL:
How to change the network IP addresses of SQL Server virtual servers
http://support.microsoft.com/kb/244980/en-us
Hope this helps,
Sincerely,
Jose Medeiros
MCP+I, MCSE, NT4 MCT
408-765-0437 Direct
408-449-6621 Cell
--------------------------------------------------------------------------------------------
----- Original Message -----
From: "Mike Newell" <mike.newell@xxxxxxxxxxxx>
To: <ActiveDir@xxxxxxxxxxxxxxxxxx>
Sent: Sunday, June 04, 2006 12:53 PM
Subject: [ActiveDir] Change private IP on a cluster
Doh! Didn't mean to let this go without the OT:. Sorry.
________________________________
From: ActiveDir-owner@xxxxxxxxxxxxxxxxxx on behalf of Mike Newell
Sent: Sun 6/4/2006 11:40 AM
To: ActiveDir@xxxxxxxxxxxxxxxxxx
Subject: [ActiveDir] Change private IP on a cluster
Hey,
I have an Exchange 2003 active/passive cluster on Windows 2003 and I need
to change the private ip on both nodes. I realize that while I'm
changing the IP the nodes will not talk to each other and likely kick
the passive node off or stop the cluster service for a few minutes on
the passive node.
Is there anything else I will need to do or look out for? I don't
*think* this is a big deal but since it's a production cluster, and I've
never had to do this, I thought I would check before I tried it.
Thanks again.
Mike.
-------------------------------------------------------
List Archives: //www.freelists.org/archives/exchangelist/
MSExchange Newsletter: http://www.msexchange.org/pages/newsletter.asp
MSExchange Articles and Tutorials: http://www.msexchange.org/articles_tutorials/
MSExchange Blogs: http://blogs.msexchange.org/
-------------------------------------------------------
Visit TechGenix.com for more information about our other sites:
http://www.techgenix.com
-------------------------------------------------------
To unsubscribe visit http://www.msexchange.org/pages/exchangelist.asp
Report abuse to listadmin@xxxxxxxxxxxxxx
Other related posts: