RE: Cannot start Microsoft Exchange MTA Stacks service

  • From: "Chirag Shah" <cshah@xxxxxxxxxxxx>
  • To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
  • Date: Wed, 20 Feb 2002 11:44:49 +0530

Ok... FADI... Try to shutdown Exchange Information Store and all Exchang
related services... Shutdown Server and bring back the server... And
check if the MTA is up or not!! It should come up fine.

Chirag SHAH 
Network Engineer
Net4Nuts Limited
The Technology of Freedom 
1008 Atlanta, Gulbai Tekra,
Ahmedabad 380006, India.
Tel : +91 79 6403222
Fax: +91 79 6405155
Email: cshah@xxxxxxxxxxxx
http://www.net4nuts.com

AVTAAR - The World Wide You
 


-----Original Message-----
From: Fadi Idris [mailto:fadi.idris@xxxxxxxxxxxxxxxxxx] 
Sent: Wednesday, February 20, 2002 11:30 AM
To: [ExchangeList]
Subject: [exchangelist] RE: Cannot start Microsoft Exchange MTA Stacks
service


http://www.MSExchange.org/



Hi Chirag,

Thanks for the replay.

I have 2GB of free space on my D drive when the server is installed. and
on C drive I have 1 GB free space.

Best Regards
Fadi


-----Original Message-----
From: Chirag Shah [mailto:cshah@xxxxxxxxxxxx]
Sent: Wednesday, February 20, 2002 8:56 AM
To: [ExchangeList]
Subject: [exchangelist] RE: Cannot start Microsoft Exchange MTA Stacks
service


http://www.MSExchange.org/


Did u check if you have enough space on the C Drive of your Computer???
I had similar problem due to Hard Disk Space.... Check that first... And
clean up your Server's C Drive ...

Let me know if this helps!

Chirag SHAH 
Network Engineer
Net4Nuts Limited
The Technology of Freedom 
1008 Atlanta, Gulbai Tekra,
Ahmedabad 380006, India.
Tel : +91 79 6403222
Fax: +91 79 6405155
Email: cshah@xxxxxxxxxxxx
http://www.net4nuts.com

AVTAAR - The World Wide You
 


-----Original Message-----
From: Fadi Idris [mailto:fadi.idris@xxxxxxxxxxxxxxxxxx] 
Sent: Wednesday, February 20, 2002 11:14 AM
To: [ExchangeList]
Subject: [exchangelist] Cannot start Microsoft Exchange MTA Stacks
service


http://www.MSExchange.org/



Hi All,

First, Sorry for the long description.

I am facing the following problem on my exchange server. 

When any user sends an E-mail it reach outbox and stuck there. I found
that Microsoft Exchange MTA Stacks is not started. When I try to start
it I get an error message "could not start the Microsoft Exchange MTA
Stacks service on local computer. The services did not return an error.
This could be an internal windows error or internal service error".

The strange thing is when you go to event viewer you will find event
7009 "Timeout (30000 milliseconds) waiting for the Microsoft Exchange
System Attendant service to connect" and event 7000 "The Microsoft
Exchange System Attendant service failed to start due to the following
error: The service did not respond to the start or control request in a
timely fashion". But System Attendant service is started and I also
tried to stop is and restart it again and it restarted correctly.

After those two events I receive two events. 

Event 7001 "The Microsoft Exchange Information Store service depends on
the Microsoft Exchange System Attendant service which failed to start
because of the following error: The service did not respond to the start
or control request in a timely fashion." This service I tried to start
it manually and
it started.     

Event 7001 "The Microsoft Exchange MTA Stacks service depends on the
Microsoft Exchange System Attendant service which failed to start
because of the following error: 
The service did not respond to the start or control request in a timely
fashion." It does not start.

I tried to apply SP2 but this did not solve the problem. 

You help is really appreciated.

Thanks
Fadi Idris


------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
cshah@xxxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')


------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
fadi.idris@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')

------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
cshah@xxxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')



Other related posts: