RE: Bouncing back and forth....

  • From: "Shevill, Mark M SITI-ITDSEC4" <Mark.Shevill@xxxxxxxxx>
  • To: "'[ExchangeList]'" <exchangelist@xxxxxxxxxxxxx>
  • Date: Fri, 30 Aug 2002 12:09:42 +0200

Or try this 

Numerical Code: 5.4.6
Possible Cause: Categorizer forward loop detected.
targetAddress attribute is set on a mailbox-enabled user. Hosting Pack: This
is a common hosting configuration problem when someone creates a contact in
OU1 and creates a user in OU2 with the same e-mail address via user
provisioning tool.
Troubleshooting: This happens when contactA has an alternate recipient that
points to contactB which then has an alternate recipient that points back to
contactA. Check the contact's alternate recipient.
Check and remove targetAddress attribute from mailbox-enabled users.
For hosting where you want to send mail from one user in one company (OU) to
another company (OU), you should configure the following two related
objects:
User: SMTP proxy: user@xxxxxxxxxxx
Contact: targetAddress: user@xxxxxxxxxxx; SMTP proxy: contact@xxxxxxxxxxxx 


Mark Shevill
IMG Messaging Deputy Team Leader
Shell Information Technology International Limited
Rowlandsway, Wythenshawe, Manchester M22 5SB, United Kingdom

Tel: +44 161 935 7152
Email: Mark.M.Shevill@xxxxxxxxxxxx
Internet: http://www.shell.com


-----Original Message-----
From: Shevill, Mark M SITI-ITDSEC4 
Sent: 30 August 2002 10:59
To: [ExchangeList]
Subject: [exchangelist] RE: Bouncing back and forth....


http://www.MSExchange.org/

You have duplicate SMTP addresses.


Mark Shevill
IMG Messaging Deputy Team Leader
Shell Information Technology International Limited
Rowlandsway, Wythenshawe, Manchester M22 5SB, United Kingdom

Tel: +44 161 935 7152
Email: Mark.M.Shevill@xxxxxxxxxxxx
Internet: http://www.shell.com


-----Original Message-----
From: Andrea Coppini [mailto:AndreaCoppini@xxxxxxxx]
Sent: 30 August 2002 10:44
To: [ExchangeList]
Subject: [exchangelist] Bouncing back and forth....


http://www.MSExchange.org/

I always seem to find a solution the minute I post a problem I have in this
forum, so here is my next problem.... Bouncing messages between 5.5 and 2K
within the same site.

My mailbox is on the 2k server.  When I try to send an e-mail to a mailbox
on the 5.5 server, I get the following error:

---------------------
Your message did not reach some or all of the intended recipients.

      Subject:  Test Subject
      Sent:     30/08/2002 10:55 AM

The following recipient(s) could not be reached:

      Test 5.5 User on 30/08/2002 10:55 AM
            A configuration error in the e-mail system caused the message to
bounce between two servers or to be forwarded between two recipients.
Contact your administrator.
            <srv-mail.domain.com #5.4.6>
---------------------


Message tracking shows the following:
---------------------
30/08/2002  11:21 AM     Tracked message history on server SRV-MAIL
30/08/2002  11:21 AM              SMTP Store Driver: Message Submitted from
Store
30/08/2002  11:21 AM              SMTP: Message Submitted to Advanced
Queuing
30/08/2002  11:21 AM              SMTP: Started Message Submission to
Advanced Queue
30/08/2002  11:21 AM              SMTP: Message Submitted to Categorizer
30/08/2002  11:21 AM              SMTP: Non-Delivered Report (NDR) Generated
---------------------

Any ideas?


Regards
Andrea Coppini
+356 79 ANDREA (263732)
andreacoppini@xxxxxxxx

EMPOWER PEOPLE - THE WORLD IN YOUR HAND

iWG (iWORLD GROUP) is a global e-mobile company creating, building and
growing new businesses.  iWG founders are pioneers in creating multi-billion
dollar mobile and Internet businesses in Europe, Asia and the US.

The Global Partners include the shareholders Bank of America, Deutsche Bank,
Hikari Tsushin, McCaw, PaineWebber/UBS, The Dolphins' Trust, Perikles Trust
and the iAA Advisory Network.

www.iWG.info

www.countryprofiler.com/iWG

Privileged/Confidential Information may be contained in this message.  If
you are not the addressee indicated in this message (or responsible for
delivery of the message to such person), you may not copy or deliver this
message to anyone. In such case, you should destroy this message and kindly
notify the sender by reply email.

------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
Mark.Shevill@xxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')

------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
Mark.Shevill@xxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')


Other related posts: