RE: ADSL Connection

  • From: "Ezzeldin, Ezzeldin S." <ezzeldin@xxxxxxxxxxxxxxxxx>
  • To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
  • Date: Fri, 8 Aug 2003 09:25:01 -0400

If you have a firewall, then you need to NAT the new Public address to
your Private address.
If you don't have firewall then you need to add the route on your router
to the internal net and that should fix your problem. 


Ezzeldin


-----Original Message-----
From: John Tolmachoff (Lists) [mailto:johnlist@xxxxxxxxxxxxxxxxxxx] 
Sent: Thursday, August 07, 2003 9:26 PM
To: [ExchangeList]
Subject: [exchangelist] RE: ADSL Connection

http://www.MSExchange.org/

Are you planning on adding a firewall?

John Tolmachoff MCSE CSSA
Engineer/Consultant
eServices For You
www.eservicesforyou.com

> -----Original Message-----
> From: david [mailto:apba08@xxxxxxxxxxxxx]
> Sent: Thursday, August 07, 2003 2:02 PM
> To: [ExchangeList]
> Subject: [exchangelist] ADSL Connection
> 
> http://www.MSExchange.org/
> 
> Dear all,
> 
> If this is off-topic "Sorry!" and please would one of you kind people
go
off
> line and give me a few pointers.
> 
> I have just changed my ISP and moved from ISDN to ADSL. The new ISP
assured
> me he would guide me through the changeover and had all the necessary
> expertise in his organisation. Except that the technical department
"don't
> know anything about MS exchange"!! :-(
> 
> SO I have a single domain network with NT4 Sp6a and Exchange Server
5.5
SP3.
> The IP address of the exchange server is 192.168.100.2. I have been
given
a
> list of 4 static IP addresses from the ISP
> 
> Broadcast address 213.237.197.31
> Gateway address   213.237.197.30
> Firewall          213.237.197.29
> Network           213.237.197.28
> 
> He will provide an SMTP feed to (I think) the gateway address.
> 
> I have a vigor 2600 series router configured with an IP address of
> 192.168.100.1.
> 
> What do I need to do to make the 192.168.100.2 link to the gateway
address?
> DO I need to configure each PC to add the WINS and DNS IP addresses of
the
> ISP (like I had to do for ISDN)?
> 
> All guidance will be gratefully received.
> 
> As an aside I do find it difficult to find reference material that
covers
> the interfaces like this particular one.
> 
> Regards
> 
> David Stevens
> 
> 
> ------------------------------------------------------
> List Archives:
http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
> Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
> Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
> ------------------------------------------------------
> Other Internet Software Marketing Sites:
> Leading Network Software Directory: http://www.serverfiles.com
> No.1 ISA Server Resource Site: http://www.isaserver.org
> Windows Security Resource Site: http://www.windowsecurity.com/
> Network Security Library: http://www.secinf.net/
> Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
> ------------------------------------------------------
> You are currently subscribed to this MSExchange.org Discussion List
as:
> johnlist@xxxxxxxxxxxxxxxxxxx
> To unsubscribe send a blank email to leave-exchangelist-
> 1440469J@xxxxxxxxxxxxx


------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Other Internet Software Marketing Sites:
Leading Network Software Directory: http://www.serverfiles.com
No.1 ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/
Network Security Library: http://www.secinf.net/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion List as:
ezzeldin@xxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')


Other related posts: