On Sun, Oct 31, 2010 at 2:00 AM, <tpgww@xxxxxxxxxxx> wrote: > For experimental purposes at least, I changed svn to show "Working" plus a > spinner, for gtk >= 2.20. I haven't used or evaluated it. > I've just evaluated r2144 and the spinner works quite nicely to indicate 'progress' in a clear manner. One issue is that it works for two operations, while for the third the spinner disappears and only 'Working' appears, while for the subsequent nothing at all appears in the status pane. To replicate, select a file and hit <f2>, then <esc> select another file and <f2>, and so on for 4-5 times. (It may be important to perform this sequence quickly.) Towards the end of this trial neither 'Working' nor the spinner will appear. The other minor 'issue' is the wording 'Working'. I feel that the previous 'In progress' was more appropriate for the job, even if it'd take more space. But that's not very important. Thank you Liviu -- Users can unsubscribe from the list by sending email to emelfm2-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field or by logging into the web interface.