> So, u managed to flash the device through stlink using FTDI cable? I flashed the device with stm32flash software through FTDI cable, on UART 3, pins PB10 and PB11. Stlink would be the integrated programmer on board, which uses the other USB port. -Otso >> Hi, >> >> I managed to get the toolchain installed and flash the discovery through >> UART. I didn't get the eLua shell connected, a quick search on the >> internet claims that shell is available on micro USB connector which I >> didn't use. >> >> Instructions are clear and concise, biggest hurdle in my way was the >> luarocks.org being down which obviously is outside of our control. >> >> -Otso >> >> > Teemu might have one. And, we dont have micro usb cables. I use my >> phone >> > charger. Or it would be good tht u test it with uart using stlink. I >> use >> > usb dfuse-util. >> > On Jul 29, 2014 6:28 PM, <otso@xxxxxxxxxxxx> wrote: >> > >> >> Hi, >> >> >> >> I'd be happy to test the instructions tomorrow. Do we have an extra >> >> f4discovery somewhere? >> >> >> >> -Otso >> >> >> >> >> >> >> >> >> > >> >> >> >