Hi, I think that we should copy&adapt this from Cosa... * @section Board * @code * Arduino Uno * ----- ------- * +-|(o)|-[P]----------| USB |---+ * | | | [O] | | | * | ----- [E] | | | * | ------- | * | | * | []| SCL * | []| SDA * | []| AREF * | []| GND * NC |[] []| D13/SCK/LED * IOREF |[] []| D12/MISO * RESET |[] []| D11/MOSI/PWM5 * 3V3 |[] []| D10/SS/PWM4 * 5V |[] []| D9/PWM3 * GND |[] []| D8 * GND |[] | * Vin |[] []| D7 * | []| D6/PWM2 * A0/D14 |[] []| D5/PWM1 * A1/D15 |[] []| D4 * A2/D16 |[] []| D3/EXT1/PWM0 * A3/D17 |[] []| D2/EXT0 * SDA/A4/D18 |[] ICSP []| D1/TX * SCL/A5/D19 |[] o-o-o* []| D0/RX * \ o-o-o / * +--------------------------+ * @endcode */ -eero- On Fri, Jun 13, 2014 at 1:03 PM, Atte Peltomaki <atte.peltomaki@xxxxxx> wrote: > On Tue, Jun 03, 2014 at 07:24:22PM +0300, Asif Sardar wrote: > > I found this to be extremely important to write detailed wiki pages > > for the environment setup. If you have any suggestions to improve it, > > you are welcome! > > > > Please check the following wiki pages: > > > > Ell-i Runtime > > > https://github.com/Ell-i/Runtime/wiki/Compiling-and-development-environment-setup > > > > Ell-i Robot Framework > > https://github.com/Ell-i/ELL-i-PyBot-Tests/wiki/Read-Me > > Asif, Teemu and me met yesterday and discussed progressing ELL-i > documentation further. Current goal is now set to providing a high > quality set of basic instructions for getting new people started with > ELL-i. > > Action points: > > * Style guideline (Atte) > * OS-specific instructions for Ubuntu and OSX (Atte) > - Hopefully Teemu can hook me up with an STM32F4-Discovery board so I > can keep that documented, too > * Example "hello world" code with build and flash instructions for > ellduino, aka. how to test the toolchain without writing your own code > (Asif) > * ELL-i Runtime and Robot: document source tree layout (Asif) > * High-level overview of all (relevant) ELL-i code repositories; > intended purpose and current status (Teemu) > * Ellduino high-level description; design goals and key components with > links to their spec sheets (Teemu) > * Ellduino pin layout map, basically combine these: (Teemu) > http://arduino.cc/en/uploads/Main/ArduinoDue_Front.jpg > https://github.com/Ell-i/Hackathon/wiki/Ellduino-expansion-headers > > This is not a comprehensive list of future plans, only a manageable > size task list with self-contained results. Once these are done, we will > reiterate over items currently in backlog and create a new task list. > > -- > Atte Peltomäki > atte.peltomaki@xxxxxx <> http://kameli.org > "Your effort to remain what you are is what limits you" > >